10% off everything online for one week only | Offer ends 9 December
See more Glues & adhesives
Diall Liquid Superglue 20ml
A specially formulated high strength, fast setting adhesive. It has been specially formulated to achieve the strongest possible bond between well-mated, non-porous surfaces. Recommended for use Porcelain, rubber, metals, plastics.
- Extra strong bond strength
- Guarantee - Statutory
- Keep the adhesive in a cool, dry place between 20°C and 25°C. For long-term storage, refrigeration (5°C) is recommended
- Make sure the surfaces to be bonded are clean and dry (it is preferable to solvent-wipe plastics, glass, rubber and to acid-treat metals). Place cap on tube and tighten to pierce the metal seal. Dispense a drop or droplets to one surface only. Apply only enough to leave a thin film after compression. Press parts together and hold firmly for approximately 10 seconds. Good contact is essential. An adequate bond develops in less than one minute (maximum strength is achieved in 24 to 48 hours). Wipe off excess adhesive from the top of tube and re-cap. If left uncapped the product may deteriorate from contamination to moisture in the air
- Keep out of reach of children. Wash hands thoroughly after handling. Use only outdoors or in a well-ventilated area.
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|CE marked||Not CE marked|
|Drying time||24-48 h|
|Maximum application temperature||80°C|
|Maximum heat resistance temperature||80°C|
|Minimum application temperature||-55°C|
|Resistant to moisture||Moisture resistant|
|Resistant to water||Not water resistant|
|Suitable for||Metals, plastics, porcelain & rubber|