See more Tiling Adhesives
Diall Ready to use Wall tile adhesive & grout, White 13.1kg
This wall tile adhesive & grout is waterproof and suitable for ceramic and mosaic wall tiles, max size 300 x 300 mm.
- For use on - Suitably prepared rigid walls
- Recommended for - Bathrooms and kitchens
- Heat, mould and water resistant
- Suitable for splash areas
Features and Benefits
- Anti Mould
- Dries white
- Not suitable for grouting natural stone, satin, matt, metallic or porcelain tiles
- No separate grout needed
Health and Safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Drying time||24 hours|
|Ready to grout||24hours|
|Coverage||Up to 8 m²|
Mick10 - 1 year ago
Got this on Tuesday and took it back today don't wast your money on this it drops off your float and make a right mess more goes on the floor than on the wall very poor product and not good value for money leave well alone.
Diall ready mixed wall tile adhesive grout
No good - 1 year ago
Bought 2 months ago not very good found it very runny not fit for job.
AVOID!!!! Very runny and no strength.
DH7 - 2 years ago
AVOID!!!! Very runny and no strength. Tried with just one 30x30 mosaic tile. After 10 mins of manipulating & trying, tile was still not holding to wall and peeling back off row by row. Has the consistency of double cream! Not what I expect from B&Q.
kinny - 4 years ago
really good no problems sticking in ten mins no worrys about tile falling off says it covers 8 m dont think so
(No title submitted)
Brom - 4 years ago
This is not GREY as stated! I reserved it and it turned out to be white great the reason for the reservation was to ensure we had grey grout.
Customers who bought this also browsed
Evo-Stik Superior strength Ready mixed Wall tile adhesive,
This wall tile adhesive is waterproof and suitable for suitable for use with ceramic, terracotta, sandstone, porcelain, marble & travertine tiles. For use on - Tile directly onto fixed tiles, plaster, plasterboard, bricks, marine plywood or cement surfaces provided they are rigid and clean Recommended for - ...
Mapei Fast Set Powder Stone & porcelain adhesive
This stone & porcelain adhesive white is waterproof and suitable for ceramic, porcelain and natural stone tiles. For use on - Plaster, plasterboard, render, screed, concrete, ceramic & porcelain tiles, mosaics & non staining natural stone products Recommended for - Wet areas including showers and ...
Mapei Powder Mosaic Tile Adhesive, White 5kg
This mosaic tile adhesive is waterproof and suitable for ceramic, glass, natural stone & porcelain. For use on - Concrete, plaster, plasterboard, plywood & cement boards Recommended for - Kitchens, bathrooms & wetrooms Frost, water & heat resistant Flexible for where limited movement is likely e.g. ...
Mapei White Anti-Mould flexible grout (W)5kg
This 5000g anti-mould flexible grout is use with underfloor heating & timber floors on for ceramic tiles, natural stone & porcelain. Simply apply and leave for up to 5 hours to dry. Each pack covers up to 39 m² on average. Guarantee - 1 year Resistance - Mould and water ...