See more Tiling Adhesives
Diall Ready to use Wall tile adhesive & grout, White 6.6kg
This wall tile adhesive & grout is waterproof and suitable for ceramic and mosaic wall tiles, max size 300 x 300 mm.
- For use on - Suitably prepared rigid walls
- Recommended for - Bathrooms and kitchens
- Heat, mould and water resistant
- Suitable for splash areas
Features and Benefits
- Anti Mould
- Dries white
- Not suitable for grouting natural stone, satin, matt, metallic or porcelain tiles
- No separate grout needed
Health and Safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Drying time||24 hours|
|Ready to grout||24hours|
Low quality product
The Tile Master - 1 month ago
Two days after I fit the tiles I accidentally removed one tile by hand! It was easy to scrape the adhesive with my finger! This adhesive is not stronger than cheese!
Not as good as the big brands but does the job ok
Bodgeitandrum - 7 months ago
This works ok? Not sure about the other terrible reviews but worked fine for me.
It's not as good as some of the bigger brands but it's also not as expensive. It worked for me with a reasonable result.
Swallet - 7 months ago
Bought this in haste regretted it. Hoped to save money and time by not having to use separate grouting product. Big mistake - too good to be true.
A terrible adhesive. Powdery and dries too quickly, very hard to work with. Following day several tiles had popped off.
Straight in the bin so never used it as a grout.
Waste of time and money
Old Biker - 9 months ago
Very poor adhesive with some tiles falling off after a day when grouting, would not buy again or recommend ,
rpincowes - 9 months ago
This is a terrible product to use. You will never get a smooth grout line. The problem is that, because it’s pre-mixed, it takes longer to dry the thicker is it applied. So where it is laying thinly on the surface of a tile, it will go hard while the grout itself in the joins is still completely soft, if you try to rub the hardening grout off the surface of the tiles you will ruin your grouting. My advice: always use grout that you have to mix with water.
Customers who bought this also browsed
Evo-Stik Superior strength Ready mixed Wall tile adhesive,
This wall tile adhesive is waterproof and suitable for suitable for use with ceramic, terracotta, sandstone, porcelain, marble & travertine tiles. For use on - Tile directly onto fixed tiles, plaster, plasterboard, bricks, marine plywood or cement surfaces provided they are rigid and clean Recommended for - ...
Mapei Fast Set Powder Stone & porcelain adhesive
This stone & porcelain adhesive white is waterproof and suitable for ceramic, porcelain and natural stone tiles. For use on - Plaster, plasterboard, render, screed, concrete, ceramic & porcelain tiles, mosaics & non staining natural stone products Recommended for - Wet areas including showers and ...
Mapei Powder Mosaic Tile Adhesive, White 5kg
This mosaic tile adhesive is waterproof and suitable for ceramic, glass, natural stone & porcelain. For use on - Concrete, plaster, plasterboard, plywood & cement boards Recommended for - Kitchens, bathrooms & wetrooms Frost, water & heat resistant Flexible for where limited movement is likely e.g. ...
Mapei White Anti-Mould flexible grout (W)5kg
This 5000g anti-mould flexible grout is use with underfloor heating & timber floors on for ceramic tiles, natural stone & porcelain. Simply apply and leave for up to 5 hours to dry. Each pack covers up to 39 m² on average. Guarantee - 1 year Resistance - Mould and water ...