We remain open and here to help. Customer and colleague safety remains our priority. Whether shopping in store or online, we urge you to follow the Government's social distancing guidelines and to shop responsibly only for what is necessary.
See more Fillers
Diall Solvent-free Coving Adhesive & filler 2.5L
This coving adhesive & filler is suitable for all lightweight polystyrene and polyurethane coving, mouldings and ceiling centres.
- Guarantee - 1 year
Features and benefits
- Good initial grab, covers up to 25 metres
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Suitable use type||Coving|
Good Adhesive if used properly
Zanzan - 1 month ago
You have to put a few small nails or pins along the bottom length and the top to keep the coving from sliding down the wall. Make sure there is no adhesive on the wall or ceiling when you fill the gaps as the adhesive will dry quite quickly so use a wet sponge to clean any excess.
Eddie48 - 3 months ago
No "grab" whatsoever. Leave it on the shelf at B and Q.
This product is not very good
Kevin123098 - 3 months ago
I bought this product and it doesn’t grab as described and after drying there are cracks on the joints. I would recommend a tube/ glue based adhesive.
Gav_46 - 3 months ago
I used this adhesive to put up polystyrene coving in my bathroom, I was apprehensive about using this but it was fantastic. it wasn't harsh smelling or tacky as it covered the coving, I had to seal the coving against the wall and tile which I was worried about but its held well. I used it as an adhesive and filler, I would recommend this as it good value for money and quality.
Big snicks - 3 months ago
Having used this on the first bedroom, I’ve followed using this by the book, sticking coving to a clean surface and used a fair amount per piece, yes it dries fast and is easy to apply but doesn’t have a very good stick to it, it would be ideal for sealing the joints of the coving but not for applying coving to walls, I would recommend no nails as it’s full proof