Diall Zinc-plated Mild steel Angle bracket (H)38mm (W)29mm (L)29mm, Pack of 2
Product details
Product information
Product information
This angle bracket is ideal for creating a strong bond between timber, masonry and steel at an angle.
Specifications
| Brand | Diall |
|---|---|
| Pack quantity | 2 |
| Height (mm) | 38mm |
| Width (mm) | 29mm |
| Material | Mild steel |
| Product code | 03208755 |
Manufacturer / EU responsible person
Manufacturer
Kingfisher International Products B.V.
Address
Rapenburgestraat 175, E,
Amsterdam
1011 VM
Netherlands
Contact
Reviews
3.5 / 5(4 reviews)Christian - 5 / 5 - 16/09/2026
Always great products at B&Q
I’m forever in B&Q, great staff and everything to hand
Bowlesbird - 5 / 5 - 13/09/2026
For for the purpose and strong
These were exactly what I needed to secure a new giant island counter top in place. They have allowed the counter top to settle and move and enabled it to remain on the carefully measured placement. We used 6 brackets in all for 6 double back to back cupboards with a 2.5m x 0.96 solid oak worktop eh in was in one piece. The weight of the worktop took three of us to move and lift into place so these are taking a heavy load and doing the job. We had no concerns with the way they lines and were bent to the 90 degrees pretty much exactly so aligned with the surface well. They are silver in colour but for us that hasnt mattered as they are not visible. They were smooth with no rough surfaces or edges and came with the screws in the pack. So far so good these have retained their finish and being in a steamy atmosphere to date have not discoloured or coroner.
Matt - 3 / 5 - 29/05/2026
OK but not enough screws
Brackets themselves were fine and did the job, but not enough screws provided. Only 5 in each pack rather than 8 as in the illustration.
AllenFred - 1 / 5 - 08/05/2021
Size of screws should be labeled.
This is not useful to me unless the size of screws are listed so I know whether it is suitable for my purpose.