See more Paint
Dryzone Anti Mould Paint (1 Litre, White) - 5 Years Protection Against Mould Growth on Walls and Ceiling. 10m² - 12m² coverage
Sold & shipped by Safeguard Europe
Available online only and not stocked in B&Q stores
Product details
Product information
Dryzone Mould-Resistant Emulsion Paint is a premium-quality mould-resistant paint for protection against the growth of black mould on walls and ceilings. It is available in brilliant white and magnolia in a “soft sheen” finish.
It's ideal for use in areas where condensation can be a persistent problem, such as bathrooms, kitchens and bedrooms. The resulting finish is fully washable and can be maintained using any suitable mould-cleaning spray.
- Suitable for use on Brick, concrete, existing paintwork, plaster, plasterboard, masonry & wallpapers
- Surface Preparation - Preparation is straightforward and very similar to normal good decorative practice. 1. Put down dust sheets before work begins 2. Remove any loose material such as old paint, grease, dirt, mould or defective wallpaper 3. If mould is present, thoroughly clean the area using Dryzone® 100 Mould Sanitiser. Avoid sanding the mould area to reduce spreading of spores. 4. Allow to dry thoroughly. 5. For glossy surfaces lightly abrade the surface with abrasive paper avoiding inhalation of dust and wearing suitable personal protective equipment (face mask, gloves, safety spectacles etc). 6. If necessary, apply an appropriate primer or sealer. For new or porous plaster surfaces use Dryzone® Mould-Resistant Emulsion Paint thinned up to 10 % with clean tap water as normal good practice. Allow to dry thoroughly. New plasterwork should be allowed to dry for 7 – 14 days before applying any paint finish.
- Instructions for Use - 1. Apply Dryzone System Mould-Resistant Emulsion Paint using brush or roller. 2. Stir thoroughly before use. 3. Apply two coats of Mould-Resistant Emulsion Paint allowing sufficient drying time between coats. 4. Clean equipment with clean tap water before the paint dries. 5. Mould-Resistant Emulsion Paint must not be covered with any other paint or wallpaper.
- Legal information: H317 - May cause an allergic skin reaction. H412 - Harmful to aquatic life with long lasting effects.
Features and benefits
An excellent, premium quality, low odour mould-resistant coating guaranteed to protect against unsightly and unhygienic black mould even when there is persistent condensation. The unsurpassed performance of Dryzone System Mould-Resistant Emulsion Paint is achieved by combining modern paint
technology with advanced paint-film protection. It is fully washable and resistant to the effects of condensation when the coating is fully dried out.
- Premium quality mould resistant paint from experts in damp proofing
- Protects against black mould growth on walls and ceilings
- Effective even against persistent condensation
- Professional strength, low odour
- Coverage: 10m² - 12m²
- Coverage: 10m² - 12m²
Legal Information
- H317 - May cause an allergic skin reaction. H412 - Harmful to aquatic life with long lasting effects.
Specifications
Brand | Dryzone |
---|---|
Application method | Brush or roller |
Colour | White |
Container type | Tin |
Coverage | 12m² |
Drying time | 110 min |
Finish | Matt |
Location | Interior |
Minimum touch dry time | 1h |
Number of coats | 2 |
Paint type | Treatment |
Recoat time | 2-4 hours |
Room use | Any room |
VOC level | Low |
Volume | 1000ml |
Washable | Washable |
Product code | 5060132765388 |