See more Paint Samples
Dulux Once Ivory lace Matt Emulsion paint 0.03L Tester pot
This emulsion paint is suitable for for use on interior walls and ceilings and covers 11 m² per litre on average.
- Surface preparation:Ensure surface is clean and free from grease and dust
- Durability:Dulux once matt has been specifically formulated to give you the perfect finish in just one coat
- Apply a thick, even coat using a medium pile roller, using a brush for edging. Load roller evenly and generously, ensuring paint is not spread across more than 0.5 m2 per roller load
Features and Benefits
At B&Q we want you to be satisfied with your colour selection. Not all monitors will display colours the same and paint tins may not show the same colour as your walls do in natural light. We therefore recommend you order a tester pot online or pop in store to pick one up so you are sure that this is the right colour for you.
- Dulux colour tester in once matt finish. Perfect for choosing a fresh new colour
- Water based
Health and Safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Areas for use||Interior walls and ceilings|
|Litre capacity (L)||0.03L|
|Colour description||Ivory lace|
|Coverage||11 m² per litre|
|Drying time||4 hours|
|Recoat time||4 hours|
|Paint/Stain/Varnish base||Water based|
|Recommended for||For use on interior walls and ceilings|
Customers who bought this also browsed
Dulux Easycare Ivory lace Soft sheen Emulsion paint
This emulsion paint is suitable for for use on interior walls and ceilings and covers 13 m² per litre on average. Surface preparation:Ensure surface is clean and free from grease and dust Durability:An exceptionally tough moisture and steam resistant paint with MouldTec formulation that protects the paint against ...
Dulux Easycare Warm pewter Matt Emulsion paint 0.05L
This emulsion paint is suitable for and covers up to 13 m² per litre on average. Apply 2 coats with a brush or roller, leave 2-4 hours between coats. Do not apply in very damp or humid conditions or extreme temperatures. TIP: if the colour change is strong, more coats ...