Dulux Problem walls White Multi-surface Basecoat, 5L

Sand any rough bits paint. Scrub walls so absolutely no glue left. Apply watered down over any polyfillla. Then apply with fine finish roller three or four thin coats leaving dry overnight between coats. I also rollered first just the patchy bits of paint to layer up to rest of surface. Takes time but worth it. Dries very very fast so roller quickly and don't stroller semi dried bits as will lift back off! Can sand lightly between coats any imperfections. After two coats of coloured paint my walls look really smooth.

Bought this to help provide a better surface to old plaster walls after removing about 5 layers of wallpaper and backing paper then filling the obvious bits with thistle easy fill. I then gave the wall a quick sand and applied dulux 3 in 1 basecoat. Its really thick and a coat or two really has helped to provide a much better surface that looks good once painted over with colour topcoat. It's a tad pricey but so far with a bit of prep work its saving having to reskim walls. Prep is still key, though rather impressed with this product.

Bought this to cover 1930’s horsehair plaster which was badly crackle grazed. As a smoker my ceiling was stained too. Used this on my walls and ceiling, brilliant stuff well worth buying. Planning on using in my kitchen before decorating there too