10% off everything online for one week only | Offer ends 9 December
See more Glues & adhesives
Evo-Stik Evo-Grip Solvent-based Buff Grab adhesive 380ml
This grab adhesive from the Evo-Grip range by Evo-Stik is suitable for use with most materials and surfaces around the interior & exterior of your home.
- Suitable for Interior & exterior use
Features and benefits
Evo-Stik Evo-Grip is a multipurpose gap filling adhesive, designed for professional use. It is a high performance, fast setting synthetic rubber/resin adhesive that has excellent initial grab and is ideal for a range of building and DIY applications.
- Very fast setting, no need for nails or screws
- Fixes a wide variety of building materials
- Excellent initial grab
- High strength
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
Blue_14 - 2 months ago
Could not even stick small plastic curtain bracket to plasterboard wall.
mondo 2 - 4 years ago
i wanted to stick something overhead & it worked perfectly well pleased
Need more nails now - 4 years ago
I actually wondered if i had a dodgy tube as this was so poor. Took a hand cramping effort to squeeze it out the tube and when it finally oozed out, it just fell in globs and curls of a very doughy consistency so not easy to draw a line of it along the timber as you are meant to do. It had no grip as the blobs just squashed into pancakes when i attempted to press the surfaces i was sticking together - it had about as much grip as Corbyn does in the upcoming election. Rubbish product, waste of mone
Maybe I just got a bad tube?
petenb1979 - 5 years ago
Used no more nails last week to stick some skirting, had no problems at all. Grabbed this stuff this week to do a different room. It wouldn't come out of the gun, so sawed the tube open and it was sort of play-do consistency and not at all sticky. I'm really not sure if it's supposed to look like that or not, but I'm not chancing another tube. Going back to no more nails.
Does not do what it says on the Tube
LMW - 5 years ago
Am an experienced DIY-er. Bought this to stick untreated porous MDF against a semi-porous plaster wall. Did not 'set in seconds' Did not grip within 20 mins,.Eventually just took the panel off and wiped the glue off fairly easily. Spoke to Tech dept: If I have this right-it only sets when the water evaporates... in this season of ambient temperatures (centrally heated interior?) it takes longer etc etc. 24 hours. Not what it says on the tube at all. Apparently 'setting' does not mean it sticks. I bought this because I can't clamp the 2 surfaces and was expecting a reasonably fast adhesion initially, even if not fully cured.