See more Paint sprayers

Home

Right chevron

Paint sprayers

Right chevron
Left chevron
icons.title_zoominicons.title_zoomouticons.title_zoomreset
Ronseal Precision Finish Fence & shed Paint sprayer
Right chevron

Ronseal Precision Finish Fence & shed Paint sprayer

Sold & shipped by B&Q

£
28
Loading
Checking availability...

Product details

Product information

    Ronseal Precision Finish Fence Sprayer accurately treats a fence panel in less than 4 minutes. It’s got two spray width settings for accuracy and speed, making it easy to do the hard to reach bits as well as filling in large areas.

    • Guarantee - Statutory
    • Comes with 1 x Fence Sprayer
    • Adjustable flow rate
    • Non-adjustable spray pressure
    • Instructions for Use - Do not use in windy weather to avoid coating surfaces you don’t want to. 1) Push down the handle of the sprayer and rotate anti-clockwise until the pump pulls out. 2) Pour the sprayable liquid into the tank. 3) Once filled, screw the pump back in and turn the hand clockwise, make sure it’s tight. 4) Place the sprayer on a flat surface. 5) Pump the handle up and down. 6) Pressurise the sprayer until the pressure release valve opens. You should hear a slight hissing noise. 7) Hold the nozzle around 25cm away from the fence. 8) Use long sweeping arm movements rather than short wrist movements. 9) Move down the fence and overlap your previous spray by 50%. This will make sure the whole area is covered with the right amount of product. To clean the sprayer, push the pump handle all the way down and lift the pressure release vale until you can no longer hear any hissing. Once the pressure has escaped, unscrew the pump unit and tip any leftover liquid back into its tub. You could also spray the excess liquid back into its container before releasing pressure. You should never dispose the stain into drains or watercourses. Rinse out the sprayer several times with clean water and refill with clean water. Pressurise again and spray it through the nozzle until the water runs clear – it’s best to do this on the speed setting. To clean the wand, unscrew the handle from the trigger and clean the filter with clean water. Remove the nozzle and white filter and clean with warm, soapy water and an old toothbrush. Don’t use a sharp object as this will damage the nozzle and ruin the spray pattern. Put the nozzle back together. Take care to do this in the correct order.
    • Cordless
    • Does not include plug

    Features and benefits

    • Paints up to 5 times faster than a brush
    • Fast and accurate precision
    • Ready to use
    • Funnel neck for easy filling and decanting
    • A solid base with foot rest for stability when pumping
    • Clear indicator to see how full the sprayer is
    • Holds 5L of paint

    Specifications

    BrandRonseal
    Height (mm)477mm
    Hose length (m)2m
    Length (mm)230mm
    MaterialPlastic
    Maximum flow rate24L/hr
    Pack quantity1
    Power voltage supplyNot mains fed
    Tank capacity5000ml
    Weight (kg)2.37kg
    Width (mm)265mm
    Product code5010214876464

    Documents

    Product Instruction Manual