See more Wastes, Traps & Overflows
FloPlast Tubular swivel waste P trap (Dia)32mm
Part of the drainage system, this tubular swivel waste p trap from FloPlast is made from hard-wearing plastic and has a compression fitting type. It's suitable for plastic and copper pipes.
- Guarantee - 1 year
Features and Benefits
|Standard||BS EN 274|
|Compatibility||Plastic and copper waste pipes|
|Ease of application||Easy|
Saving the day
Suto - 10 months ago
Absolutely nailed the job .so easy to install .who needs a plumber lol
Chippy 2f - 11 months ago
I bought this trap very disappointed,the threads on it were very soft couldn't tighten enough to hold water
Worked fine for me.
Billy Today - 1 year ago
I'm no plumber, but I would always use PTFE tape on any compression joint and had no leaks with this product. It was a replacement P trap as the old one was clogged up with lime-scale so didn't have to cut any pipework - even so, no problems.
Nicko116 - 1 year ago
So i tried to fit two of these to my bathroom sink, the first one broke and the second leaked. The seals are rubbish and the screw threads not sufficient to hold the screw rings. I went to a competitor and it took me 2 minutes to fit theirs! Much better quality product.
It leaks - poor design
CSK - 3 years ago
The join between the two sections of this waste trap is poorly designed. The nut to hold the two together slips off it's retaining flange and the whole lot either leaks ar comes apart entirely. Don't waste your time.
Customers who bought this also browsed
Floplast Bowl Sink Waste Kit (Dia)40mm
Part of the drainage system, this bowl sink waste kit from FloPlast is made from hard-wearing polypropylene and has a compression fitting type. It's suitable for plastic pipes to bs 5254 and bs 5255, copper waste pipes to bs 659 and bs 2871, 32mm and 40mm. Guarantee - 1 year ...
Floplast Compression Waste Overflow & Hose Connector
This white Polypropylene waste overflow & hose connector from FloPlast is ideal for carrying waste safely and cleanly away from your home. Suitable for use with plastic and copper waste pipes 32mm / 1 1/4" and 40mm / 1 1/2. Guarantee- 1 year Fitting type - Compression
Floplast Double Nozzle Trap (Dia)40mm
Part of the drainage system, this double nozzle trap from FloPlast is made from hard-wearing polypropylene and has a compression fitting type. It's suitable for plastic pipes to bs 5254, bs5255, bs en 1455 and bs en 1451 and copper pipes to bs 659, bs 2871 and bs en 274. ...
Floplast Shallow Bath Trap with Cleaning Eye (Dia)40mm
Part of the drainage system, this shallow bath trap with cleaning eye from FloPlast is made from hard-wearing polypropylene and has a compression fitting type. It's suitable for use in most ground floor situations where the discharge waste pipe is going direct to a gully. Guarantee - 1 year