See more Toilet Repair & Fittings
Fluidmaster Plastic Dual flush valve with chrome effect button
Our stores do not stock this product
This dual flush valve with chrome effect button from Fluidmaster is suitable for 1½ " and 2 " outlet toilets and is suitable for all cistern volumes.
- Guarantee - 1 year
Features and benefits
- Helps to make your toilet more water efficient
- Fits 1.5" and 2" outlet toilets
- Suitable for top, front, or side mounted push buttons
- Fully height adjustable - fits virtually any toilet
- Adjustable flush volumes on full flush, and reduced flush for optimal water saving
- Suitable for all cistern volumes
- Quick release cable/button connection eliminates cable damage
Easy to install, but it isn't dual flush
Ken1958 - 2 years ago
I just installed this unit to replace a different make in which the cable had snapped. I expect the same will happen with this eventually as they are all the same basic design. Time will tell.
Installation was simple enough however, it only seems to operate a full flush.
Both full and half flush levels are apparently adjustable. So I set full flush to maximum (slider pushed all the way down) and half flush to minimum (slider all the way up). This should show the greatest difference between the flushes. I then tried a half flush - the cistern emptied completely. After it refilled, I tried a full flush and it emptied again. No difference between a full flush and a half flush - they are both full flushes.
I wondered if maybe I had set the wrong sliders so I tried reversing the settings - half flush maximum and full flush minimum. Once again, test flushes showed no difference between a half and full flush - both are full flushes, albeit this time less water was used in both.
The only difference between a full flush and a half flush seems to be how deep the plunger can be pressed, but it doesn't make any difference to how much water is used per flush.
The basic function of flushing works, but it certainly isn't a dual flush valve by any stretch of the imagination.
Evor - 2 years ago
Easy to install after problematic removal of cistern. Button locking system could be better.
No fuss to install.
Stoney 13 - 2 years ago
The fitting was straightforward, I like the options to adjust both flush volumes and in operation a very light pressure on the button produces a really quiet flush.
Alan G L - 2 years ago
this is the second of these that i have purchased and would recommend them to anyone.
Once fitted if a replacement is needed then you do not have to undo everything in cluding the doughnut ring as it just bayonets into place. Great bit of forward thinking.
Bob 2017 - 2 years ago
This unit has a swivel base that seems to fit other units. This mean you just have replace the top half and do not have to dismantle the tank base, etc. In my case the top half with the seal kept sticking and letting water into the bowl. (Expensive if you have a water meter). So I purchased this unit and replaced the top half. The unit swivels through 90 degrees to lock and the diameter of the seal appears the same as other units, so there must be some standardisation. I used the new push button as well since there is a different fitting on the cable connection.