See more Flush doors
Flush Ply veneer LH & RH Internal Door, (H)2040mm (W)726mm
Will add style to your living space whilst providing privacy and protection from sound and draughts throughout the house
- Guarantee - 10 years
- Ready to stain or varnish
Features and benefits
- Ready to stain or varnish
- Made from responsibly sourced, Forest Friendly timber
- Supplied with high quality MDF door edges for easier fitting and a superior, knot free finish once you've decorated
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Door construction||Hollow core|
|Door opening action||Left & right handed|
Yes it’s a door but not as described.
Mr_Mac - 5 months ago
Total lies!!! This door is not plywood as described. It’s hardboard with the thinnest wood veneer possible stuck on outside. I’d go as far as this does not mean trade descriptions as ply requires layers of wood with grain in different direction. This doesn’t have that and is HARDBOARD made to look like ply with a crazy thin coating of wood.
Also be careful and check for small arrow round outside of frame which marks which side lock has to be mounted on!
CSomer - 6 months ago
Had mixed thoughts prior to ordering after reading the reviews. I can say that I’m really pleased with this door. The description of the door is accurate and fits perfectly. Easy to chisel the wood for the hinges and door latch. I’ve never fitted a door before and have no carpentry experience. My 12 year old wanted to help and used the opportunity as a woodwork lesson whilst home schooling. As long as everything is measured correctly, we found it quite simple to fit and took our time when cutting out the wood for handles and hinges. The door is a lot more solid than I expected from some of the other reviews.
Would be good value if delivered in good condition
DIYerDevizes - 3 years ago
I am not sure what the description of “ply veneer” is intended to mean, but don’t expect a plywood face. The door is finished in a thin wood veneer on a 3mm hardboard outer skin, with a thin card honeycomb core and one inch wide timber edges. There is no additional width of timber to take the screws when mounting handles. My latch needed a large opening so I was able to manoeuvre a couple of strips into place for this purpose. While the door itself seems well enough made and finished, and seemingly adequately packaged, it was unfortunately damaged somewhere along the chain of supply and delivery. With three corners damaged, a dent in one long edge, and a split in the veneer/hardboard face near one corner, anyone expecting to just hang the door and stand back to admire their work would be very disappointed. For me it wasn’t too much of an issue since I was cutting it down at an angle for an under stair cupboard (goodbye two dodgy corners and the split) and I expected to need a bit of filler before painting. If delivered in good condition it would be good value for money.
Very thin ply
Stikelback - 4 years ago
Door was cheap very thin ply.
You didn't need a drill to make holes for fitting handles you could just push through with something sharp.
Don't think this will last long.
Just what I needed!
bonkersgrandma - 4 years ago
I bought this to replace a damaged door. It arrived quickly, well packed and the delivery man kindly placed it in my hall. It is slightly lighter than the door it replaced but I have yet to varnish it. Excellent purchase. Very pleased. Thankyou