See more Fireplace Suites
Focal Point Blenheim Chrome Inset Gas Fire Suite
If you prefer the look of a real flame then this stylish gas fire is ideal for you.
- Design - Ash veneer surround with chrome effect fire
- Coal fuel bed
- Guarantee - 3 years
Features and Benefits
- To ensure a safe installation, your gas heating appliance must be fitted by a qualified gas installer (Gas Safe registered in the United Kingdom or Bord Gais registered in the Republic of Ireland) who should also verify the proposed site conditions are fully suitable for the product selected
- The fireplace really is the focal point of any homely living room. Add immediate charm and warmth with one of our Kingswood fireplace suites. Whether you prefer a contemporary interior, or a more traditional, the style of the Kingswood Suite would easily suit both. A complete fireplace solution for any living room.
- The back panel of this fireplace suite is reversible, leaving you with the choice of having either a beautifully subtle white marble effect, or for a more striking and elegant aesthetic, a black marble effect
Health and Safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Fuel type||Natural gas|
|Fuel bed type||Coal fuel bed|
|Heat output||Low 1.75 kW/high 3.1 kW|
|Chimney type||Class 1, 2 or Precast|
|Height (mm)||1065 mm|
|Width (mm)||1105 mm|
|Depth (mm)||380 mm|
|Recess requirement||(H)540mm (W)350mm (D)128mm|
Nice look but hard work
jakthedoogie - 3 years ago
Budget buy saving about £200 on separate shop items. Took hours and hours of knee aching and back bending work to piece this kit together. Everything is flat packed in the surround and hearth and needs careful construction. The hardest part is drilling and screwing the formica back plate onto the surround which is very difficult and care is needed not to split the 15mm MDF when screwing in the 9 round headed screws. If the back plate and back edge of the surround were pre-drilled by the manufacturer, then that would have saved at least 2 hours work measuring and re-measuring as the back plate over hangs on both sides and the top. Don't take this on without decent DIY skills, appropriate drill and bits and knee pads!
Nice and cosy
Peake - 3 years ago
We bought this fire about a month ago and are very happy with our purchase, great value, would recommend.