See more Shelf brackets


Right chevron

Storage & shelving

Right chevron

Shelf brackets

Right chevron

Form Timber Pine Shelving bracket (H)300mm (D)250mm

Left chevron
Zoom inZoom outZoom reset
Form Timber Pine Shelving bracket (H)300mm (D)250mm
Right chevron
Checking availability...
Checking availability...

Product details

Product information

  • Compatible with 250 to 450mm shelves
  • Locate wall studs and mark mounting locations on the top hole of the brackets, ensuring the holes are level. You should install brackets into all possible studs along the length of your shelf for stated load capacities. Partially install screw into marked holes at stud locations leaving a small gap for bracket adjustment. Place the top hole of the bracket onto screw and push down to secure. Use screws to secure the bottom of the bracket into the stud. Tighten down the top screw. Rest shelf on brackets. Use screws to secure the board to the brackets
  • Fixings sold separately

Features and benefits

The wooden bracket for natural look shelving

  • The maximum load shown may be lower depending on wall condition. All loads should be distributed evenly


Product typeShelving bracket
Pack quantity1
Product height300mm
Product weight163.5g
Product width30mm
Maximum load40kg
Model name/numberWB2
Product code3663602764618