10% off everything exclusively for B&Q Club members ends midnight, just enter your card number for discount | Not a member? Join now to receive your discount

See more Basin mixer taps

Home

Right chevron

Bathroom

Right chevron

Bathroom taps

Right chevron

Basin taps

Right chevron

Basin mixer taps

Right chevron

GoodHome Cavally 1 lever Chrome-plated Modern Bidet Mono mixer Tap

Left chevron
Zoom inZoom outZoom reset
GoodHome Cavally 1 lever Chrome-plated Modern Bidet Mono mixer Tap
Right chevron
£55
Loading
Checking availability...
Loading
Checking availability...

Product details

Product information

  • Waste supplied
  • Guarantee - 10 years

Features and benefits

This cavally bidet mixer tap comes with a 4 in 1 tool that makes it super easy to install. The round edge design matches with the other products in the cavally range, so you'll be able to create your perfect matching bathroom suite. There's also a pop-up waste included with this product

  • Easy to install thanks to the handy 4 in 1 tool that's included
  • Thanks to an easy to clean rubber aerator, you can simply wipe the spout to remove limescale
  • The water saving regulator makes it easy to conserve water and save money on your water bill

Specifications

BrandGoodHome
MaterialBrass
RangeCavally
Product width45mm
Product height121mm
Product depth113mm
Suitable water pressureHigh or low pressure
Product weight960g
Number of levers1
Number of tap holes1
Operation¼ turn
Model name/numberC10001070
Maximum operating pressure5bar
Minimum operating pressure0.3bar
Tap mounting locationBidet
Product code3663602300229

Documents

Reviews

Full star
Full star
Empty star
Empty star
Empty star
2 / 5(2 reviews)

Not for Baciu bidet

Full star
Full star
Empty star
Empty star
Empty star

SwanseaRol - 1 month ago

I have little problem with the pushrod. It might be fiddly for older fingers but it does fit discreetly into the back of the tap. Unfortunately, the top lip of the aperture on the back of the Baciu is just about 1 cm too low to accommodate the waste control ball-pivot on the back of the drain. You'd think Kingfisher would harmonise their range, given the limited number of bidets available. It may be possible to shim out the lower drain section with a tube, but we shouldn't need to.

Poor tap design & plastic waste

Full star
Full star
Empty star
Empty star
Empty star

Chesterfield Bidet Fitter - 2 months ago

The tap is badly designed: the base is about the same size as the tap hole in the sink. As a result, any slight imperfection in the underside of the sink means the tap moves over leaving a gap when you tighten the locking nut. A slightly larger base to the tap would have avoided this issue. The waste kit is all plastic, apart from a very thin looking plug. The push-pull rod for the pop-up waste is not much more than a piece of The tap is badly designed: the base is about the same size as the tap hole in the sink. As a result, any slight imperfection in the underside of the sink means the tap moves over leaving a gap when you tighten the locking nut. A slightly larger base to the tap would have avoided this issue. The waste kit is all plastic, apart from a very thin looking plug. The push-pull rod for the pop-up waste is not much more than a piece of wire: no knob on the top to make it either more aesthetic or easy to use.