See more Soldering Irons
GoSystem Brazing rod, Pack of 2
This GoSystem brazing rod is suitable for the joining of mild steel, stainless steel, brass, bronze and copper with a maximum temperature of 750°C, and a minimum temperature of 650°C.
- Guarantee - 1 year
Features and Benefits
Health and Safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Minimum temperature range||650 °C|
paulinLiverpool - 2 years ago
I bought these brazing rods today from Aintree B&Q to braize Stainless steel because the description said they were suitable. They were not in any way suitable and even using Mapp gas and the stainless steel glowing they would not stick to it.
I only wasted one and I'm going to take the other one back and try to get a full refund because they are not fit for purpose.
seanie1980 - 3 years ago
Bought to braze a repair on a bicycle frame. Thought the temperature range might be too high for thin wall tubing, but it was ok (just). Plenty flux, and a pretty high silver content, i would guess 40 to 45 percent. Good for the money, and the resulting joints were EXTREMELY strong. I will buy a few more packs when I'm in next.
easy to use
petrolderek - 4 years ago
have used these before and they are great. Used to braze up holes in a steel tank used mapp x
DanOfAllTrades - 5 years ago
Used this to braze steel. Did nicely, but definitely requires a good torch- I used Mapp but not sure it would have worked with propane. The bond was VERY strong. You don't get an awful lot of rod for your money though.
(No title submitted)
dellibb - 5 years ago
I totally agree with the last review. Absolute rubbish.
Taking it back for a refund.
FFA Concept Brass Round Metal Rod (L)1m (Dia)6mm
This round metal rod is 1m in length, and 6mm in diameter. It is used for creating, repairing or renewing in a wide range of projects. Guarantee - 1 year
Fiskars PowerGear Hedge shear
Ideal for cutting, training & trimming soft new growth on bushes & hedges Material- Corrosion resistant steel blade Handle type- Long handle Guarantee - 1 year
Gosystem Torch Kit
Fix and weld your metalwork with this GoSystem cordless torch kit. Suitable for electrical, jewellery, automotive and hobbyists. It can reach a temperature of 1300°C. Guarantee - 1 year Accessories included - Includes burning tips, hot knife and hot blower
Marshalltown Classic Curved edge Brick jointer (L)255mm (W)24mm
Carbon steel blade Handle type - Steel handle Easy to wipe clean Purpose - For striking concave joints Guarantee - 1 year