See more Blow Torches, Soldering Irons & Solder
Gosystem Fine Flame Torch
Fix and weld your metalwork with this GoSystem cordless fine flame torch. It can reach a temperature of 1450°C.
- Guarantee - 1 year
Features and Benefits
|Maximum temperature range||1450 °C|
Coolhandluke - 7 months ago
Didn’t produce fine flame as stated. Very disapointed.
waste of money
lucyanne - 8 months ago
I got this as it seemed just as I wanted, small with a fine flame. I bought the correct gas as instructed on the packet. It worked fine for a short time, then wouldn't light and no sound of gas. I bought another gas and the same again. I wish I had read these reviews before. I'm going to take it back and not ask for another as I've had trouble with another torch from Gosystem (from B&Q.) Shame if it worked it would have been great... But it isn't !!!!!
Utter rubbish !!!
sfry748 - 2 years ago
All but impossible light with a match, once lit it just kept blowing itself out, no good at all for plumbing work
Nozzle gets blocked
DIY Richard - 3 years ago
Same problem as others report ... worked fine for some time (especially for small fiddly work) then flame just dies due to blocked nozzle. Impossible to clean nozzle so had to buy a larger, less controllable, replacement. Shame.
Not worth the money
Redintheface - 3 years ago
Bought this to solder a small copper and brass joint, but the flame, if you can actually get it lit, blows itself out constantly. If you want something weaker than a match, then it's fine, but it barely warmed the joint, and never got anywhere near melting anything. Utterly useless except for helping me access my inner frustration. Don't bother, buy a better model.
Customers who bought this also browsed
Dremel Blow Torch
Fix and weld your metalwork with this Dremel cordless blow torch. It can reach a temperature of 1200°C. Guarantee - 2 years Accessories included - 1x flame extension piece, 1x deflector, 1x soldering, 1x catalyst, 1x soldering tin with blue cap, 1x soldering sponge and 1x sponge box
Dremel Gas Torch
This Dremel gas torch can be used as a to heat and apply solder and comes with 1x soldering tip, 1x cutting knife, 1x hot knife, 1x flat wide flame head, 1x reflector, 1x hot blower head, 1x soldering tin with blue cap, 1x soldering sponge and sponge box and ...
Gosystem 190G Gas Cartridge
This 190g gas cartridge from GoSystem is to be used with blowlamps . It works from a minimum temperature of -10°C. Guarantee - 3 years Fitting: International type 200, 190g pireceable butane-propane mix gas cartridge
Gosystem 400G Gas Cylinder Cylinder
This 400g gas cylinder from GoSystem is to be used with blowlamps around the external of your home. It works from a minimum temperature of -20°C. Guarantee - 1 year Fitting: Uses standard CGA600 connection