See more Primers & undercoats
Hammerite Rust beater Red Iron Primer, 750ml
Sold & shipped by B&Q
- Apply with a Brush
- Suitable for Metal surfaces
- Stir paint thoroughly. Apply 2 coats, allowing at least 6 hours between coats. A suitable Hammerite topcoat or paint system must be applied after a minimum of 6 hours. For best results, allow 24 hours. Remove as much primer as possible from equipment before cleaning, use Hammerite Brush Cleaner & Thinners. Hammerite No.1 Rust Beater should be stored in a dry, well ventilated area. Protect from frost and direct sunlight.
Features and benefits
- Kills rust, primes and undercoats all in one
- For interior & exterior use
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Drying time||6 h|
|Litre capacity (ml)||750ml|
|Location||Interior & exterior|
|Recoat time||6 hours|