Hammerite SMOOTH Direct to Rust Metal Paint 1L Black

Product information

Hammerite Direct to Rust Metal Paint Smooth forms a superior barrier that not only seals out moisture, but gives long-lasting protection inside and outside._x000D_\n_x000D_\nBoth ferrous and non-ferrous metals, as well as certain plastics and wood can benefit from a lick of this paint._x000D_\n_x000D_\nThis is a smooth gloss finish which will retain its sheen for years._x000D_\n_x000D_\nHammerite direct to rust, metal paint can be used for; metal doors, metal garden furniture, metal gates, metal railings etc._x000D_\n_x000D_\nHammerite metal paint offers 8 years of protection._x000D_\n_x000D_\nCoverage, 5 sq m per litre, durability, and can be repainted after 4 hours._x000D_\n_x000D_\nFeatures:_x000D_\n_x000D_\n 1L tin_x000D_\n Can be applied directly onto rusty_x000D_\n Can be applied directly onto rusty metal by roller or brush._x000D_\n Primer or undercoat are not necessary._x000D_\n

• Guarantee - 1 month
• Suitable for Metal
• Moisture resistant
• Surface Preparation - Can be painted directly onto rusty surfaces
• Instructions for Use - Remove all loose rust and flaking paint from the metal using a wire brush. If the metal was already painted, wash down thoroughly with diluted detergent, rinse with clean water and allow to dry. To ensure compatibility, apply a small test patch of Hammerite Direct to Rust Metal Paint Smooth Finish to the painted surface. Any reaction will occur within an hour. If a reaction is evident, remove all paint then wash down with degreaser. Rinse with clean water and allow to dry. If the objects are made from bare zinc, aluminium or galvanized metal use Hammerite Direct to Galvanised Metal Paint. For smooth metal surfaces, lightly abrade for maximum adhesion. Cover the surface beneath the metal object with thick newspaper or a dust sheet to catch any spills or drips. Stir the paint thoroughly before use, and apply with a good quality brush. A narrow brush is best for use on railings. A broad is best for use on bigger metal object, like a garden table. Apply two thin coats of Hammerite Direct to Rust Metal Paint in Smooth finish for the best results, leaving to dry in between as per instructions on back of pack.
• Guarantee - 3 months

Features and benefits

Finish : Smooth Coverage : 5 sq m per litre Manufacturer: ‎Hammerite Products ICI Ltd. Exterior: ‎Gloss, Metal Manufacturer part number: ‎5158235 Item Weight : 186 g

• Protects and rejuvenates metal
• Performs as a primer, undercoat and topcoat in one
• Paintable, sprayable and rollable
• Touch dry in an hour