See more Plywood
Hardwood Plywood Sheet (Th)5mm (W)610mm (L)1220mm
This Plywood sheet can be used for Wall sheathing, flooring, roofing, general construction and renovation work
- Wall sheathing, flooring, roofing, general construction and renovation work
- When used externally all faces and edges should be treated with an appropriate preserver
Features and Benefits
A non-structural, strong and versatile cross-layered timber veneered panel
- A rigid engineered panel with smooth faces ideal for furniture and concealment applications
- The product finish lends itself to a number of further finishing options
- Hardwood plywood is a manufactured panel made up of 3 or more thin plies of hardwood
Health and Safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|CE approved||CE approved|
|Length (mm)||1220 mm|
|Width (mm)||610 mm|
|Location||Indoor - Can be used externally when all edges and faces are sealed|
|Thickness (mm)||5 mm|
|Timber approval||FSC® approved|
Supercalifragalisticexpea - 3 months ago
Bought this marked as 12mm thick after cutting to required size for fitting discovered it is only 10mm ...ended up in the skip waste of my hard earned money
Just check the thickness
DisappointedH - 6 months ago
I bought a sheet recently in what is probably the major store in Sheffield. I looked at a number of sheets in store before buying, because I thought they looked thin despite being clearly labelled 5mm. When I measured it accurately at home with a micrometer the sheet was approximately 20% smaller than it should have been with a thickness of 4.1 - 4.2 mm. On telephoning the store the lady I was speaking to was advised by a colleague that all the boards were undersized and there none in stock that were actually 5mm thick.! But the thin boards were still on sale.
My complaint was passed on to the Store Manager but I have still had the courtesy of being contacted. So much for Customer Service in store.
My advice is to have the means with you to accurately check the thickness of plywood..Having pre-cut slots for drawer bottoms I now have a problem
Unique - 6 months ago
I examined several on display and they were awful with gaps all overvthe place. Went to elsewhere and they had more and were a bit better.
blueflame - 7 months ago
I had this item pre-cut in-store to exact dimensions and the to the credit of the guys cutting it they did it perfectly to drawing. However within a day one section bowed about 1/2cm accross 80cm. Another section has a long hollow at the edge. I could not use about 1/3 of the total board due to the quality.
Anonymous - 8 months ago
Good quality board cuts without splinters ideal for construction work
Customers who bought this also browsed
Alukap Brown Axiome sheet endstop, (H)50mm (W)40mm (L)3000mm
Alukap®-XR Endstop Bar is used as a closure for Axiome® multiwall polycarbonate and glass units at the eaves end of the roof. The Alukap®-XR Endstop bar is an 'F' shaped profile providing extra strength to rigidity of the glazing. Provides a seal, rigidity and protection to the ends of Axiome ...
Hardboard Sheet (Th)3mm (W)405mm (L)810mm
Use this Hardboard for Furniture backing, packing and floor lining Furniture backing, packing and floor lining A board with a single smooth face
Hardwood Plywood Sheet (Th)9mm (W)1220mm (L)2440mm
This is This Plywood sheet can be used for Wall sheathing, flooring, roofing, general construction and renovation work This product is included in our free timber cutting service. Please check your local B&Q for availability via the Click & Collect option on this page.
High density fibreboard Sheet (Th)3mm (W)1220mm (L)2440mm
Use this Hardboard for Furniture backing, packing and floor lining Furniture backing, packing and floor lining This product is included in our free timber cutting service. Please check your local B&Q for availability via the Click & Collect option on this page.