See more Wall Mounted Kitchen Storage

Home

Right chevron

Kitchen

Right chevron

IT Kitchens Nickel Effect Metal Wall Mounted Fitting

£7
Loading
Checking availability...
Loading
Checking availability...

Product Details

Product Information

This silver nickel effect metal wall mounted fitting is ideal for kitchen roll.

  • Guarantee - 1 year
  • Fixings supplied

Features and Benefits

    Technical Specifications

    BrandIT Kitchens
    MaterialMetal
    FinishNickel effect
    Surface finishBrushed
    Length (mm)305 mm
    Pack quantity1
    Height (mm)85.5 mm
    ModelKI.TOW.NI3
    Product code03361054

    Reviews

    Full star
    Full star
    Half star
    Empty star
    Empty star
    2.5 / 5(4 reviews)

    Disappointing

    Full star
    Empty star
    Empty star
    Empty star
    Empty star

    PG44490 - 8 months ago

    I bought a second to replace the faulty first one. Within a week the mounting shifted and the kitchen roll does not sit horizontally. It’s off kilter and extremely irritating, despite being fitted correctly! Would not recommend.

    Useful and sturdy

    Full star
    Full star
    Full star
    Full star
    Full star

    TWgt - 1 year ago

    I have mounted this vertically on a wooden floor to ceiling support in my kitchen to keep the kitchen towel secure and it works extremely well in this orientation.

    Looks good

    Full star
    Empty star
    Empty star
    Empty star
    Empty star

    aahz - 2 years ago

    Just bought this before I read other reviews and as in the other reviews I wanted to put this into a left handed corner but it needs left hand access to put the roll on so was no good for my situation and has been returned

    Flawed Product?

    Full star
    Full star
    Full star
    Empty star
    Empty star

    VMeldrew1 - 3 years ago

    Sturdy well finished product with one potential problem for some users - it is "handed" and must be installed with sufficient space to the left side of it to load the kitchen roll. This is a problem if the unit is to be mounted in a corner with access only from the right - which we wanted to do!!.
    I modified ours by unscrewing the pin which prevents the kitchen roll sliding off the horizontal support bar and drilled through the remaining metal and tapped the hole (4mm) thus permitting the pin to be screwed in from the other side and the holder to be mounted with access from the right hand side.
    Why this is not done during manufacture beggars belief as the cost would be minimal and modification does not alter the appearance of the unit once and would have given it "5 stars".