See more Valves & stopcocks
JG Speedfit Compression Service Valve, 15mm
Features and benefits
Push-fit valve for the connection of plastic and copper pipe. A must for any dwelling. The valve allows the user to stop the flow of water to a fixture, by the 1/4 turn of a screw, in case of emergency or repair. Simply push the valve fully on to the pipe. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. Installation can be reduced by around 40% against traditional fixing methods.
- Not suitable for central heating systems
- Push-fit and demountable connections
- Lead free and non toxic
- No scale build up and Corrosion Free
- BSI and WRAS approved
Appears to be good guality
Bodcar - 3 years ago
Fitted and working with no leaks so far, turns
water off ok.
Simple to fit
Ian T - 6 years ago
Purchased as a replacement for a metal valve. After turning water off at main. It was fitted and water back on within 10 mins and my diy skills are poor
Easy to fit in less than a minute!
MerryLittleGoat - 6 years ago
This is the first time I've bought and fitted one of these Service Valves, so I was a bit wary that it may be complicated to do.
I was totally wrong and it was so easy to install that I initially thought I must have missed out a step or two and expected to have floods of water everywhere once I put the stopcock back ON. But, no, not a drop of water, it did what it said it would do!
It works, it's easy (really, really easy!) and it cost less than a fiver.
Speedfit service valve
Haveagoharry - 6 years ago
Bought the service valve along with other Speedfit components (eg 'T', elbow & straight connectors) to fit an outside water tap. Very easy to use if you follow the instructions carefully. Tested the service valve & it works perfectly. All bits seem to be well constructed. No leaks after fitting all components so very pleased with the end result.