JG Speedfit Push fit Plastic Flexible tap connectors with valve (Dia)15mm (L)0.3m, Pack of 2

Features and benefits

Hand tightened only Flexi Hose for the connection of plastic or copper pipe onto a male thread appliance such as a tap. On one end the hose features a push fit connection for a supply pipe. On the other end there is a plastic nut which can be hand tightened on to a tap or male thread. Should the need arise to demount the pipe simply push the collet towards the body of the fitting and pull the pipe to release. The flexi hose also features a valve to isolate the water supply. Installation can be reduced by around 40% against traditional fixing methods Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.

• Push-fit and demountable connections
• WRAS approved
• 6 Bar @ 65 °C
• Not suitable for central heating system
• PVC Hose Material