See more Timber Back Doors
Ledged & Braced Redwood veneer Redwood timber Unglazed Back door, (H)2032mm (W)813mm
- Ready to paint, stain or varnish
- Engineered construction with legged & braced style
Features and Benefits
This ledged and braced door is produced using traditional tongue and groove methods. The timber braces are supplied loose pinned, this allows for appropriate fixing depending if you are fitting the hinges on the left or right hand side of the door. This door offers a practical solution for applications such as an entrance door for an outbuilding or side entrance gate. Our ledged and braced doors are suitable for paint finishes only.
- Supplied ready to paint
- 5mm trim allowance on 2 long edges, 6mm bottom edge and none on the top edge
- FSC certified
- 18mm thick timber tongue and groove boards
|Comes with||Door only - allows you to choose lock type & door accessories|
onlyjohn - 4 months ago
I bought one of these less than a year ago for a shed that I have built, it seemed appropriate. Once fitted, and weatherboard attached, it was painted with good quality paint, Due to it being held together with staples it has 'sagged' so much I have had to remove it and refinish and adjust the hinges twice. Each wood board has shrunk now, I can see the unpainted strips between the boards. This is so bad that during the recent rain we've had water has run down these new gaps and inside the building. Please note that I have fitted it in the same manner as shown on a house in the photos. Please learn from my mistake and avoid. It is cheap for a reason. I wish that I had kept the receipt.