20 people bought this in 48 hours
Luceco Cool white Integrated LED Batten 50W 5000lm (L)1.59m
Electrical recycling service
Thinking about buying a new electrical product from us? Find out about our electrical recycling service here
Product details
Product information
Light up your work area with this Polycarbonate LED 1500mm 50W Tube Batten fitting from Luceco. The IP65 weatherproof rating makes this ceiling light an ideal solution for illuminating industrial areas too.
- Connectable or linkable lights-Linkable
- Diffuser supplied
- Non-dimmable
- Guarantee - 3 years
Features and benefits
- IP65 rated for extreme environments
- PIR Controlled with override at wall switch
- ClipFit endcaps for quick installation
- Pullout SpeedFit piano key terminals at both ends for easy through wire-able installation
- Ceiling or suspension installation. Surface mount brackets supplied
- Robust and durable PC housing
- PIR sensor - Range: 5 metres. Time Delay 5 mins
- Suitable for outdoor and indoor use
Specifications
| Ballast type | LED driver |
|---|---|
| Brand | Luceco |
| Bulb type | Integrated |
| Cap fitting | Integrated |
| Colour temperature | 4000K |
| Equivalent wattage | 500W |
| Fittings & fixings included | Fittings & fixings included |
| IP rating | IP65 |
| kWh per 1000hr life | 50kWh |
| Life length | 25000h |
| Light colour | Cool white |
| Lumens | 5000lm |
| Material | Polycarbonate (PC) |
| Model name/number | ESL15P50W40-01 |
| Number of bulbs | 1 |
| Pack quantity | 1 |
| Power factor value | 0.9 |
| Power output | 50W |
| Power voltage supply | 220-240V |
| Product height | 51mm |
| Product length | 1590mm |
| Product weight | 722g |
| Product width | 76mm |
| Product code | 5015056642802 |
Reviews
3 / 5(2 reviews)Muhammad Waseem - 5 / 5 - 03/12/2024
Product was good
I bought thia led light it was really good bright light
James124675367 - 1 / 5 - 24/04/2024
Terrible design
Obviously designed without practicality or quality. Firstly don’t buy this light to replace a pendant light because the wiring of this unit is at the end, so you’ll have to move or extend the cable. I had to cut a channel along the ceiling and extend the cable by a metre. And to make things worse the bare wire is always poking out the end, so you have to try and minimise the impact of the holes you make, just to get a wire into position. So there is always a visible hole with a wire sticking out of it. And to accommodate the type of kink you have to put into the wire to get it the right angle, the hole needs to be fairly generous. Secondly the housing doesn’t give enough room to accommodate thick mains wires, so doesn’t shut flush. The fixing clips that hold it to the ceiling are very narrow and soft, so barely span across the channel you may need to cut chasing the wire down the length of the light. So you have to do so much work to put this light up. And if you can’t do it yourself, book a plaster and an electrician, because there will be awkward wiring. The build quality reminds me of kinder surprise. To sum up, this light is only suitable for a workshop with exposed wiring, not interiors. Don’t try putting this in your kitchen!