See more Mitre Saws
Mac Allister 1700W 230V 210mm Compound mitre saw MMSP1700L
This compound mitre saw is ideal for cutting various materials.
- No load speed - 4800 rpm
- Maximum mitre left - 45°/Maximum mitre right - 45°
- Blade diameter - 210mm
Features and Benefits
- Table mitre lock
- Transparent movable guard
- Carry handle with soft grip
- Detent base
- Rubber covered D handle
Health and Safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|No load speed||4800 rpm|
|Maximum bevel left||45°|
|Maximum bevel right||45°|
|Maximum mitre right||45°|
|Blade type||TCT blade|
|Disc bore||30 mm|
|Blade guard||Blade guard|
|Locking device||Spindle lock|
|Cable length (m)||2m|
Dsabnq - 4 months ago
The saw became unusable after the safety guard wouldn't pull down properly, the laser stopped working after the first half hour and trying to adjust the straightness of the blade was tricky because the Allen key in the box didn't fit, so overall not impressed.
Brought it, used it, took it straight back.
Hate this product - 6 months ago
The blade guard sticks constantly and would only cut if I physically lifted the guard. So one hand to pull down the saw, one to lift the guard and a third hand to hold the wood.
God saw for the amateur
Nick the cab - 6 months ago
I bought this to repair my decking. First this is not a profesional tool but then it is very cheap. On a 45 degree cut ti does have a limited width it can cut having said that it cuts very well and quickly giving you a nice straight machine cut. The bag to catch the saw dust is not very good but it is easy to connect it up to your henry vac and catch a whole lot more. Can't comment on the laser guide as I couldn't get it to work only when I finished did I realise it had no batteries and none were supplied. Altogether a light weight very portable and very safe saw that is ideal for thew oxxasional use, recommended.
Doesn't' do what it says..
mr doityourself - 6 months ago
I needed a mitre saw to cut 45 degree mitres on some 120mm decking boards, it says it will do this on the box and a couple of guys instore said it would...well it dosen't it falls short by about 15mm so will be returning it...
Anonymous - 7 months ago
Have found on the one originally purchased and returned AND the replacement th3 blade guard sometimes jams and doesn't allow t he saw to lower without just heading the plastic guard up a little. . Very annoying but overall it cuts well and accurately. . Would probably but again because of the good value and hope the guard problem doesn't reoccur
Customers who bought this also browsed
DeWalt 1100W 240V 216mm Compound Mitre Saw DWS773-GB
Comes with work piece clamp, removable carry handles, 30T TCT blade, hex key and blade key No load speed - 4500 rpm Maximum cutting depth at 90° - 70mm Maximum cutting length at 90° of 250mm Maximum mitre left - 48°/Maximum mitre right - 48° Blade diameter - 216mm
Mac Allister 1400W 165mm Circular Saw MECS1400
This corded circular saw is ideal cutting laminate worktops, boards and sheet materials. 5500 rpm no load speed 64mm maximum cutting depth at 90° and maximum cut at 45° mitre 165mm diameter blade Depth adjustment facility Features: Lock on power trigger, soft grip handle and 3m cable
Mac Allister 400W 240V Mini Saw MEMS400
This corded mini saw is ideal for cutting wood, soft metal and ceramic tile. 0-3300 rpm no load speed Maximum cutting capacity of 20mm on wood and 20mm on metal Comes with 1 x TCT blade for wood, 1 x ceramic-cutting blade, 1 x metal-cutting blade & moulded plastic carry ...
Mac Handheld 1200W 240V 165mm Plunge Saw LT63006S
This corded plunge saw is ideal cutting wood and plunge cut. 6000 rpm no load speed 54mm maximum cutting depth at 90° and 38mm maximum cut at 45° mitre 165mm diameter blade Depth adjustment facility Features: Trigger switch, Soft grip and 3 m cable