See more Drill drivers
Makita DHP487Z 18V LXT Brushless Combi Hammer Drill Sub Compact Bare Tool + Case
Sold & shipped by Buyaparcel
Product details
Product information
The Makita DHP487 18v LXT Brushless Cordless Combi Drill delivers outstanding performance without the bulkiness and weight of the typical cordless tool. The LXT Compact continues to refine the formula of faster-charging batteries with leading power-to-weight ratio's. (Batteries not included) Extreme Protection Technology protects the tool against dust moisture even in the harshest jobsite conditions, increasing durability. Features Highly durable aluminium diecast gear housing protects the tool for potential damage that may occur on a jobsite Forward reverse 3 Drilling Modes: Screwdriving mode (rotation with clutch) for achieving an even consistent finish when fastening screws. Drilling mode (rotation only) achieving 40Nm max. torque. Hammer Drilling mode (rotation with hammering) for drilling in masonry up to a maximum 13mm hole diameter All metal gears and gear housing for more efficient power transmission Ultra-compact design (only 164mm long) Dual LED lights to illuminate the work area Comes With 1 x DHP487 Combi Drill Body Only Bare Tool - No Batteries or Charger Supplied Includes Brushless LXT Tool Case
- Guarantee - Statutory
Features and benefits
Impact Rate Low/High: 0-7,500/0-25,500 ipm Max Drill Masonry: 13 mm Max Drill Steel: 13 mm Max Drill Wood: Auger bit: 36mm / Self-feeding bit: 35mm / Hole saw: 51mm No Load Speed Low/High: 0-500/0-1,700 rpm Blows per Minute Low/High: 0-7,500/0-25,500 bpm Max Tightening Torque Hard/Soft: 40/25 Nm Overall Length: 164 mm Net Weight (With Battery, Sold Separately): 1.7kg NOISE VIBRATION Sound Pressure Level (LpA): 83 dB (A) Sound Power Level (LWA): 94 dB (A) Sound Uncertainty (K): 3 dB (A) Drilling Vibration Level (Concrete): 10.5 m/sec� Drilling Vibration Level (Metal): 2.5 m/sec� Drilling Vibration Uncertainty (K): 1.5 m/s�
- No Load Speed Low/High: 0-500/0-1,700 rpm
- Impact Rate Low/High: 0-7,500/0-25,500 ipm
- Blows per Minute Low/High: 0-7,500/0-25,500 bpm
- Max Drill Wood: Auger bit: 36mm / Self-feeding bit: 35mm / Hole saw: 51mm
- Max Drill Steel: 13 mm
- Max Tightening Torque Hard/Soft: 40/25 Nm
- Overall Length: 164 mm
- Max Drill Masonry: 13 mm
Specifications
| Switch type | Trigger switch |
|---|---|
| Motor type | Brushless |
| Length (mm) | 1mm |
| Width (mm) | 1mm |
| Height (mm) | 1mm |
| Colour | Blue/Black |
| Drive action | Drill & screwdriver action |
| Power voltage supply | 18V |
| Batteries included | Batteries not included |
| Product code | 0088381740333 |