See more Vents & Ducting Kits
Manrose 12523 Wall fixing kit (D)150mm
Keep the air inside your home clean with the use of this white Manrose PVC wall fixing kit.
- Accessories included - Grille and wall duct
- Fixings supplied
- Suitable for -For providing ventilation
Features and Benefits
|Power output||20 W|
Russdaddy72 - 2 years ago
Bought this for a 150mm cooker hood vent.
The pipe is far to short, 300mm max, and closer to 165mm diameter so it flaps about on the housing and as nothing is provided to attach it to the vent it is of no use at all.
The fixing holes on the vent are to close in and mean if you cut a hole to fit the pipe diameter there is nothing for the screws to fix to.
The vent is ok.
sparky101 - 3 years ago
Used 150 core drill and tried to fit this but it was too big.had to cut in half and gaffer tape it
Just not right!
tonybob - 6 years ago
Simple, drilling a 152mm hole in a wall for a 150 mm extractor fan was hard, yet fitting the ducting (silver stuff) is impossible - the grille is fine, 150 mm, however the ducting is oversized - i.e. nearer to 160 mm which meant that it is not going to fit in the hole itself.
This should be a snug/tight fit to a 150mm fan/grille yet it is way out, and even if it did it should contain ties to fix both ends correctly. Useless.