See more Light Switches
MK 10A 1-Way Single White Gloss Light switch
Raised screwed profile light switch with plastic gloss white finish. 1 gang internal switch, ideal for controlling 1 circuit.
- Location: Internal use
- Switch type: Rocker switch
- Suitable for: Suitable for modern interiors
Features and Benefits
For your safety, electrical products must be installed in accordance with local building regulations. If in any doubt, or where required by the law, consult a competent person who is registered with an electrical self-certification scheme.
- 20 year Guarantee
|Number of gangs||1|
|Number of poles||Single pole|
|Number of ways||1|
Poor quality control
Jimbox - 4 months ago
Bought with a matching MK pattress/mounting box so screw holes should line up but they don't. Even opening holes up to 4.5mm dia. still struggled to get screws in. Not easy to get wires to grip.
Retaining screws are too short to grip the wires
wraighty - 9 months ago
I too bought two of these. The terminal screws are not long enough to trap the wires. Also the screws are very tight. I will be taking back for a refund. Always used MK before. Whatever has happened to the quality?
Great price. Does what its supposed to
Ed far - 10 months ago
great price. Does what its supposed to.
Easy to fit
A bit fiddly to wire up
Sagalout2 - 10 months ago
Once installed the switch works fine, with a satisfactorily positive click when turning on or off. However I found it fiddly to tighten up the terminal screws in such a way that the two copper cables in each were firmly gripped. I think that other products in the MK range that I have have bought in the past had chunkier terminal screws and were thus easier to wire up with without risk of the copper wires becoming loose when the switch is being pushed into its final position.
This switch is very inexpensive; I'd happily pay a bit more for a version that was less fiddly to wire up.
Dnme - 10 months ago
Brought to replace broken one. This replaced it perfectly, only downside was that the fixing screws were too short so had to use old ones. Also one of the connectors for the cable at the back did not tighten up/close well at all.