See more Power Sockets

Home

Right chevron

Sockets

Right chevron

Power Sockets

Right chevron

MK 13A White Single Switched Socket with neon

£9.97
Loading
Checking availability...
Loading
Checking availability...

Our stores do not stock this product

Product Details

Product Information

Raised screwed profile socket with neon with plastic white finish.

  • Suitable for Internal use

Features and Benefits

For your safety, electrical products must be installed in accordance with local building regulations. If in any doubt, or where required by the law, consult a competent person who is registered with an electrical self-certification scheme.

  • BS 1363 socket: 35mm(W)x34.2(H)x22.3(D)

Specifications

BrandMK
Model name/numberK2657RPWHI
ColourWhite
Pack quantity1
ProfileRaised
Power voltage supply250V
Screwed/screwlessScrewed
Switched/unswitchedSwitched
Number of gangs1
Amp rating13A
Product code5017490327260

Reviews

Full star
Full star
Half star
Empty star
Empty star
2.6 / 5(5 reviews)

Simple to fit and connect

Full star
Full star
Full star
Full star
Full star

Eyelaserman - 2 years ago

I needed a neon equipped switch - exactly what I got!

not easy to use

Full star
Empty star
Empty star
Empty star
Empty star

cr49 - 2 years ago

screws will not hold down the wires - awful product!

Not the quality I expected!

Full star
Empty star
Empty star
Empty star
Empty star

CR29 - 2 years ago

Poor quality product - I'll fitting screws would not hold the wires!

Quality manufacture

Full star
Full star
Full star
Full star
Full star

Wat26 - 3 years ago

Good manufacture of product and easy to fit.
Good quality finish with rounded corners to faceplate.

Not easy to fit

Full star
Empty star
Empty star
Empty star
Empty star

mr b 2015 - 4 years ago

I bought an Mk plug socket yesterday to replace an old broken socket. It was meant to be easy to fit! The difficulty is if your cables are short and cut back to copper the holding contact mechanism doesn't screw down far enough. The design I suspect relies on the thickness of the cable coverings with only a minimum of copper. It is not like the traditional design of simply screwing the copper end down ( as say you would with a standard uk plug). I gave up and as it was fair distance to b&q simply popped out and bought a standard plug from the local electrical supplier.