See more Power Sockets
MK 13A White Switched Single Socket with neon
Raised screwed profile socket with neon with plastic white finish.
- Suitable for Internal use
- Guarantee - 20 year Manufacturer
Features and Benefits
For your safety, electrical products must be installed in accordance with local building regulations. If in any doubt, or where required by the law, consult a competent person who is registered with an electrical self-certification scheme.
- BS 1363 socket: 35mm(W)x34.2(H)x22.3(D)
|Number of gangs||1|
|Number of poles||Double pole|
|Standard||BS1363 pt2: 2010|
Simple to fit and connect
Eyelaserman - 1 year ago
I needed a neon equipped switch - exactly what I got!
not easy to use
cr49 - 1 year ago
screws will not hold down the wires - awful product!
Not the quality I expected!
CR29 - 1 year ago
Poor quality product - I'll fitting screws would not hold the wires!
Wat26 - 2 years ago
Good manufacture of product and easy to fit.
Good quality finish with rounded corners to faceplate.
Not easy to fit
mr b 2015 - 3 years ago
I bought an Mk plug socket yesterday to replace an old broken socket. It was meant to be easy to fit! The difficulty is if your cables are short and cut back to copper the holding contact mechanism doesn't screw down far enough. The design I suspect relies on the thickness of the cable coverings with only a minimum of copper. It is not like the traditional design of simply screwing the copper end down ( as say you would with a standard uk plug). I gave up and as it was fair distance to b&q simply popped out and bought a standard plug from the local electrical supplier.