See more Plywood
Natural Softwood Plywood Board (L)2.44m (W)1.22m (T)18mm
This Plywood Sheet is Furniture manufacture, construction, pre-fabricated components, base for laminating
- CE marked
- Guarantee - Statutory
Features and benefits
This product is available for Bulk delivery for orders over £100. To place an order call 0300 303 4481 or speak to a member of staff in store. Lines open Monday - Saturday 08:00 - 20:00 and Sunday’s 10:00 – 16:00. Calls charged at standard national rate.
- Furniture manufacture, construction, pre-fabricated components, base for laminating
- Clear face, traction and compression resistant
- Outstanding visual appearance, containing occasional small knots which favour its use for furniture and decorative sheathing
- This panel offers great dimensional stability and high physical mechanical resistance to be used in interiors and exteriors
- Exterior glue favours suitability for interiors and exteriors. To be suitably treated when used externally
- Made using responsibly sourced, Forest Friendly timber
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Standard||BS EN 636: 2012+A1:2015|
Plain and simple really.
EC1993 - 3 days ago
Good Pieces of Plywood Boards bought in store. Had them cut to the exact sizes I needed by the store assistant who has happy to help. One of the boards did have a small area of splitting but didn't cause me any problems. Used them to make cupboard units for a utility room. Did the job nicely. Only awkward part was getting then in the car but would buy again if needed for another project. It is worth buying in store if able in order to choose your own as these boards do warp and split.
YorkieDave - 1 month ago
Great piece of ply for the price, we definitely be purchasing more for ongoing projects
'9mm' Plywood measures up as less than 8mm!!
TerryK - 1 month ago
Further to my previous review complaining about the poor quality of this so called 'hardwood' ply and the problems I had with surface delamination and splitting I have actually measured it up, some of the board was around 8 to 8.1mm thick, some even less. Please see photo of it against a competitors 9mm.
Appalling Quality Surface Splinters and Cracks
TerryK - 1 month ago
I bought an 8'x4' sheet of this. Described as 'hardwood@'.Surface layer is micro thin and several times with careful sawing and drilling it came away in ugly splintered layers. I used B&Q 9mm in 2019 and was impressed but this is useless. Have scrapped the start I made on some cupboards and bought a sheet elsewhere. 50% more expensive but at least it will produce a decent job.
ITS POT LUCK
Kentcabinet - 2 months ago
I bought a number of these sheets knowing that there was a good chance that they might be bowed or delaminating. As the delivery guy opened up the van (he and the lady co driver were excellent) the sheets looked very true - first hurdle. I’ve cut some and the cut edges have been very good - no splintering. Okay, not best birch ply quality, but not the same price. The reality is that, with B&Q and all sheds, it’s pot luck. They buy lots, price is key, quality is variable and you take your chance. If you want consistency, pay the price and go to a specialist. If you are in a position where you can reject sheets, then try your luck.