See more Tiling adhesives
NX Instant grab Ready mixed Off white Wall Tile Adhesive, 2.5kg
NX ready to use & instant grab wall tile adhesive is suitable for fixing interior ceramic tiles in bathrooms & kitchens. The high-bond strength & non-slip formula makes it quick and easy to use. Each pot covers up to 0.4 m² on average.
- Suitable for Ceramic
- Water resistant
- 25 years guarantee
Features and benefits
- For use on interior ceramic wall tiles
- Non-slip adhesive reduces the need for support battens
- High bond strength
- Ready mixed formula makes it easy to use
- Water resistant
- 25 year lifetime guarantee
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Drying time||24 h|
Fpg - 8 days ago
Would give minus star rating if possible. Absolutely useless product and not fit for purpose. Even after 24 hours, tiles still loose. And those fitted two days befbefore have come off when I removed the spacers. B and Q needs to seriously review this product and remove it from sale as it can only damage sales integrity and consumer confidence.
Beware Tub only 1/2 Full Beware
Audrey M - 9 days ago
When I opened the tub it was only 1/2 full. Will require more for the job in hand. Is this clever putting 2.5 Kg in a bigger Tub or is it Deceitful ? I think the second. Buyers need to be aware or like me will have to buy more ( Should have bought the more expensive one in the first place , it would have been cheaper in the long run
Deceiving tub size
Boblaz - 2 months ago
This is a good tile adhesive, But beware the tub size looks like there is a reasonable amount of adhesive for the price till you open it. It's less than half full, I weighed it, it was what it claimed to be, so why (other than to deceive the buyer) is the tub so big. I was very disappointed and had to get some more adhesive but would not purchase this brand again.
Worked well with mosaic tiles
HopwoodBoy70 - 6 months ago
First thing to be aware of is that this adhesive is sold by weight and not volume. The tub is only actually half full so if you're working out how much you need based on size of tub then you'll need to double up! Or check the coverage guide printed on the side!
As for performance I have no complaints. I spread the adhesive on the wall, used a tiling comb to get a uniform thickness, and my mosaic tiles went on perfectly. The adhesive set well in 24 hours to allow me to grout the next day.
I think some people may be putting too much adhesive on and not combing it to put the necessary space behind the tile to allow the adhesive to set properly.
"Instant Grab" Not so much...
J Wallace - 6 months ago
Found that some of the larger tiles I was using were slipping down the wall and had to be held in place for a few minutes to hold in place. Very frustrating. Would probably be ok for small tiles. Save yourself the hassle and get some decent Mapei adhesive.