Pack of 5 Laser Compatible MDF Boards 600mm x 400mm x 4mm
Product Features
- Pack of 5 sheets light brown in colour
- 4mm MDF compatible for laser cutting and engraving
- CARB2 compliant
Product details
Product information
Product information
This pack of 5 MEDITE Premier MDF boards are cut to a more manageable size of 600mm x 400mm each. The 4mm thick MDF fibreboard has a smooth surface face and a uniform fibre structure. Due to these properties and the fact that it is a very thin MDF panel, it makes an ideal choice for use with laser machines for cutting and engraving. MDF can be used for a variety of DIY and crafting applications. Medium Density Fibreboard (MDF) is a reconstituted wood panel product. Measurements (length x Width): 600mm x 400mm 60cm x 40cm 23.62 inch x 15.75 inch Medite Premier MDF conforms to E1 formaldehyde levels, as well as complying with the lower levels required by CARB phase 2 (CARB Phase 2 compliant <0.11ppm). As a natural timber product, and as this is a very thin MDF board, there could be a slight bow or twist when placed on a flat surface. This is normal and it is recommended that the edges are taped down when used for laser machining applications. There is a small tolerance in thickness of +/-0.15mm.
- Guarantee - 6 months
Features and benefits
There is no official classification or grading for MDF suitable for laser cutting and engraving. As the MEDITE Premier MDF conforms to E1 formaldehyde levels, it is a more suitable option for laser machine use.
- Pack of 5 sheets light brown in colour
- 4mm MDF compatible for laser cutting and engraving
- CARB2 compliant
- Low formaldehyde emissions
- FSC Certified
- Smooth surface
- High fibre density
- Suitable for various DIY and woodworking projects
Specifications
| Brand | MEDITE |
|---|---|
| Location | Internal |
| Material | Medium-density fibreboard (MDF) |
| Pack quantity | 5 |
| Product length | 600mm |
| Product thickness | 4mm |
| Product width | 400mm |
| Product code | 5750092087653 |
Safety Information
The machining of the panel product will generate wood dust particles when sawing and sanding, and fumes when laser cutting. Wood dust and fumes should be contained through a combination of vacuum and extraction cleaning equipment.
This product conforms to E1 formaldehyde levels as well as also complying with the lower levels required by CARB phase 2 (CARB Phase 2 compliant <0.11ppm)
Suitable fire extinguishing agents: Water, Dry Powder, Carbon Dioxide (CO2) & Foam.
Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed.
Store the product in a dry, well-ventilated area away from open flame or other ignition sources.
Appropriate safety eye wear, complying with an approved standard should be used when a risk assessment indicates this is necessary in order to reduce any exposure risk.
Appropriate gloves, complying with an approved standard should be used when a risk assessment indicated this is necessary in order to reduce any exposure risk.
The choice of sufficient respiratory protection must take into account the anticipated exposure levels when sawing, sanding or laser cutting the panel product.
Emissions from work place exhaust/ventilation systems, vacuum cleaning systems or process equipment should be monitored to ensure they comply with the requirements of environmental protection legislation.
Keep away from strong acids, bases and oxidising agents
Manufacturer / EU responsible person
EU responsible person
Easy Access System Europe Ou
Address
Mustamae tee 50
Tallinn
Harju
10621
Estonia