We remain open and here to help. Customer and colleague safety remains our priority. Whether shopping in-store or online, we urge you to follow the Government’s social distancing guidelines and to shop responsibly only for what is necessary. Online planning appointments are available at all stores.
See more Greenhouses
Palram Harmony 6x14 Polycarbonate Apex Greenhouse
- 0.7 mm thick glazed walls
- Comprehensive fitting instructions provided with this product
Features and benefits
This greenhouse features SmartLock connectors to make assembly easy
- Accessories included - Guttering
- Clear, virtually unbreakable polycarbonate panels, provides over 90% light transmission
- Locking mechanism - Lockable door handle
- Maximum load 75kg/m2
- Fitting instructions - Comprehensive fitting instructions provided with this product
- Growing your own produce helps to reduce the environmental impact of food.
|Assembly required||Assembly required|
|Base included||Base included|
|Base material||Galvanized steel|
|Fittings & fixings included||Fixings sold separately|
|Locking mechanism||Lockable door handle|
|Number of doors||1|
|Number of fixed windows||2|
Great polycarbonate greenhouse
Phil m T - 1 year ago
I purchased this to fit a 18x6ft space so a perfect fit .The instructions were easy to follow
I did manage to construct it myself but I recommend getting help. The polycarbonate sheet
are sharp so a pair of gloves would be advised. The greenhouse does rattle in the wind but takes nothing away from its overall usability If being erected on a windy site anchoring is advisable. As seen in photos the greenhouse is up and running with a lot more in the beds
Well written manual - very straightforward!
ss2506 - 2 years ago
It is ideally a two person job assembling the greenhouse and if you have an electric screwdriver with some sockets it's easy enough. There were a couple of parts that were missing their numbered sticker, but you can see from the pictorial instructions where they go. A really great product for its price!
Chasmo - 3 years ago
Bought this for my wife for giving birth to my baby daughter Rosie.Our first greenhouse .I would advice when placing it in your garden try and pick a sheltered area from the wind and keep the door on the opposite end of the direction from the wind.Built this myself the only difficult part is when you put both the long sides up there quite floppy until you put the bar across all seven panels of them to steady them .And wear gloves as you do get cuts from the polycarbonate panels as they are all stuck together in a separate box.Tthere is contact details enclosed within the box from the supplier.I stay up in Scotland and was missing two panels of polycarbonate glass along with a seal for my opening roof window phoned the enclosed telephone number on the Friday they just asked for my address and place of purchase and the missing parts arrived the next day excellent service .The only other tricky part is when you put the roof Windows into the ridge part of your roof there are 4 small rubber parts that get pushed into the ridge part either side of your windows to stop them sliding left to right.THe Windows don't come with hinges they slot into the groove on the top of your ridge.Make sure you slide all your bolts into place as per the instructions as some of the bolts are slipped in for bits to be attached later.The large headed Philips screws are for putting your base together and screwing 4 plastic rhone pieces on .The black small Philip screws are used for screwing your plastic end pieces of your roof for keeping your panels in place to stop them slipping down. I also used a 10mm socket set when complete to go round and tighten all the small nuts and bolts for added strengthThese are the only tricky bits I found but on the whole a great robust greenhouse when built and value for money.
Grimesy - 4 years ago
I bought this product and took it back the day it was delivered as plastic just like wrapping round Easter eggs and not strong enough for purpose
Overall good greenhouse
MoarA - 4 years ago
I found the instructions straightforward and the panel are a great idea. Having build glass greenhouse before and had to replace sections this is an excellent feature. I found the panels had not been cut properly, whatever machine they are using to cut them goes off towards the end. This meant alot of trimming on my part to get them to fit. The biggest problem was not constructing it but securing it to a secure base. There are plenty of holes in the base panels all the way around. The problem is that the design doesnt allow you to get above the holes to get screw or bolts in. I ended up having to use an adjusted screwdriver which allow me to tighten the screws (with great difficulty) from the side. If the holes had been accessable it would have saved a huge amount of time.