See more Cold Water Tanks
Polytank 190L Cold water loft tank, (L)1185mm (W)510mm (H)490mm
Our stores do not stock this product
Product details
Product information
This 190L loft tank is ideal for new builds and as a replacement tank. It comes fully packaged, just add water.
- Comes with Snap on Polylid, byelaw 30 kit, fitting instructions, 1/2" BS1212 part 2 ball valve & 4 1/2" float. Ball valve back plate, 22mm compression tank connector, 15mm x 1/2" angled service valve, insulation & ties.
Features and benefits
Snap on Polylid, byelaw 30 kit and fitting instructions, 1/2" BS1212 part 2 ball valve and 4 1/2" float. Ball valve back plate, 22mm compression tank connector, 15mm x 1/2" angled service valve and Insulation and ties
Specifications
| Brand | Polytank |
|---|---|
| Pack quantity | 1 |
| Product height | 490mm |
| Product length | 1185mm |
| Product width | 510mm |
| Connection type | Compression |
| Tank capacity | 190L |
| Product code | 5060028999965 |
Reviews
Good tank but poor accessories
Pod8 - 2 years ago
I thought I was buying a quality product but first the plumber found that the angled service valve leaked from around the valve itself and had to go out and buy another and then when I came to putting the insulation on, a whole piece was missing. It says, wrap the larger section all the way round the tank. There was only one piece in the roll so nothing to put on the top.
I have yet to find out how B&Q will address this.
As expected.
Mjh2106 - 3 years ago
Received on time with all the relevant fittings as expected.
Great value.
Obig - 4 years ago
I bought a 42 gallon Polytank from B&Q after undertaking a website search of many other suppliers. To my surprise, the B&Q price was really competitive and included delivery! It was the best result I turned up. The Polytank was complete with all necessary fittings, and again to my surprise, it was delivered the very next day after ordering online. It's a great product, at a great price and with a great service.
Replacement Loft tank Kit
JG100 - 4 years ago
I bought this to replace and update my system to accommodate extra capacity for a new power shower. The Kit only contains 1x 22mm water outlet so I needed to buy a second for the supply to the immersion tank. The Hole sizes required for the pipe work ( as per installation guide) were 22,27 &29mm. However I could only find 22 & 29mm. So the tank breather was installed using the 29mm, which seemed to fit OK and didn't need to be watertight. It's a shame the breather wasn't specified/made as such. All in all a good kit .
Complete tank package
JohnGJ - 4 years ago
Next day delivery(free).Delivered with all required fittings for the tank.Also supplied with a schematic drawing with all dimensions plus a pictorial step by step installation guide.Very good purchase.