Primeline Manrose PEF6110 (WF150A) Axial Kitchen / Utility Room Window Extractor Fan (Standard Model)

Product information

Window Mounted Extractor Fan Normally Used in Kitchen / Utility Room Locations

• Fittings & fixings included
• Ducting not included

Features and benefits

• This model is designed for remote operation from a switch or fused spur connection unit.
• Mains voltage 220V - 240V AC 50Hz. This is the standard version of this fan, so requires only TWO electrical connections - live and neutral. No over-run timer, therefore no circuit board. Class II - double insulated
• Extraction rate 64 litres per second, 220 cubic metres per hour
• Sound output 40dB(A) @ 3m
• 25 watts power consumption. Single speed. Can also be mounted on a wall
• Automatic electrically operated back draught shutter with silent operation, opens / closes slowly on power up / power down
• Requires a 184mm diameter hole. The glass thickness can be 4 to 22mm thick although you can use longer screws of the same gauge to bridge larger gaps if required. Supplied pre-flexed. This fan is normally wired up to a nearby fused spur connection unit, lighting circuit or a 13 amp plug can be fitted (requires 3 amp fuse)
• Dimensions: 205mm high x 205mm wide x 101mm deep (inside) and 25mm (outside - if in glass). The three pictures above show the front, side and rear of the unit.