See more Tile sealants
QEP Tile Sealant, 1L
Seal your tiles with this tile sealant. Simply apply with a lint free cloth and wait for 4 hours to dry.
- Clean fully prior to application
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Resistant to water||Water resistant|
Multiple applications work!
col045 - 9 months ago
Yes it’s thin and runny, but it needs to soak into the tiles, and it’s for porous tiles so it will soak in - that is to be expected. But each application takes longer to soak in as it permeates and builds up in the tiles. We have used it on travertine marble and find that three coats painted on with a brush is adequate. After leaving the final coat to dry in for a couple of days, water just beads and runs off. So, it does work but some patience and multiple coats required.
Annoyed39 - 3 years ago
Absolutely useless is now in the bin went to tops tiles to purchase a event product
QEP Tile Sealer
Anonymous - 5 years ago
Bought yesterday, just like water, no odour , no consistency. The bottle states to use with caution yet the contents are not stated! The instructions said leave to dry for 4 hours, but it had dried like water would in 5-10 minutes.Took product back to check against another bottle and it was the same. I will be seeking further info on this product.