Ronseal Anti Condensation White Matt Damp seal paint, 0.75L

• Suitable for use on Plaster
• Surface Preparation - To prepare a wall for painting, check if the wall is affected by mould. If the wall is affected by mould, use a mould killer to completely remove it. Don’t sand off the mould or attempt to remove it in any other way as you could spread the mould spores. Damp stains can be covered with a damp seal. Remove any wallpaper and get rid of any loose paint or plaster by giving it a quick sand. Make sure the area you’re painting is clean and dry.
• Instructions for Use - Thoroughly stir the paint to make sure the consistency is smooth. Pour the paint into a tray and cover a roller or paintbrush in it. Apply to the wall but don’t brush or roller it out too thinly. Wait four hours for the first coat to dry. Apply a second coat. The wall will be touch dry in one to two hours and ready to be painted over after four hours.
• Instructions for Use - Thoroughly stir your Anti Condensation Paint to make sure the consistency is smooth. Pour the paint into a tray and cover a roller or paintbrush in it and apply to the wall but don’t brush or roller it out too thinly. Wait four hours for the first coat to dry. Apply a second coat, your wall will be touch dry in one to two hours and ready to be painted over after four hours.

Features and benefits

• Moisture Resistant
• Insulates Walls
• Ronseal Anti Condensation Paint can be used as a topcoat, or you can paint another colour over it. Its tough, scrubbable finish is moisture resistant and helps to prevent the causes of mould.
• Ready to paint over in four hours
• Helps prevent the cause of mould
• Insulates your walls