See more Paint
Ronseal Anti Condensation White Matt Damp seal paint, 2.5L
Sold & shipped by B&Q
Ronseal Anti Condensation Paint adds an extra layer of insulation to your wall and puts a stop to condensation building up and mould growing.
- Suitable for use on Plaster
- Surface Preparation - To prepare a wall for painting, check if the wall is affected by mould. If the wall is affected by mould, use a mould killer to completely remove it. Don’t sand off the mould or attempt to remove it in any other way as you could spread the mould spores. Damp stains can be covered with a damp seal. Remove any wallpaper and get rid of any loose paint or plaster by giving it a quick sand. Make sure the area you’re painting is clean and dry.
- Instructions for Use - Thoroughly stir the paint to make sure the consistency is smooth. Pour the paint into a tray and cover a roller or paintbrush in it. Apply to the wall but don’t brush or roller it out too thinly. Wait four hours for the first coat to dry. Apply a second coat. The wall will be touch dry in one to two hours and ready to be painted over after four hours.
- Guarantee - Statutory
Features and benefits
Ronseal Anti Condensation Paint can be used as a topcoat, or you can paint another colour over it. Its tough, scrubbable finish is moisture resistant and helps to prevent the causes of mould.
- Insulates Walls
- Moisture Resistant
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Application method||Brush or roller|
|Drying time||2 h|
|Minimum touch dry time||2h|
|Number of coats||2|
|Quick dry||Quick dry|
|Recoat time||4 hours|
|RGB value||255, 255, 255|