See more Decking Paint & Treatments
Ronseal Clear Decking stripper 2.5L
You can apply this decking stripper from Ronseal to interior surfaces with a brush. It's suitable for removing decking coatings such as oils & stains and will cover Up to 10 m² per litre on average.
Features and Benefits
- Strips stains and oils off decking
- Only needs one coat, saving you time and effort
- Works in just 30 minutes
- Easy to use
Health and Safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Litre capacity (L)||2.5L|
|Coverage||Up to 10 m² per litre|
|Drying time||30 minutes|
|Touch dry time||30 minutes|
A lot of hard work but worked
Blondielass72 - 5 months ago
But twice as much as you think you may need and it will take twice as long as you think. If you follow the instructions and don’t do it when it’s too hot and sunny, even wet your decking slightly once applied so it doesn’t dry out. I did use a wire brush, even though you really shouldn’t, but it was the only way it was going to get the stain properly off. Took 2 days of hard slog and I’m a woman lol. Just need to clean it now with cleaner and then it’s oil this time. Wouldn’t stain a decking again.
Angela6666 - 6 months ago
Did exactly as instructed, fell over it was like an ice rink when applied, how can you go over areas that are drying out if you can't even step in it. Anyway off to diy store to try something different
jackskilly - 6 months ago
This product did not work on our decking, waste of money!!
Anne13 - 1 year ago
We needed to strip some steps made from decking. This worked really well. It does take a bit of effort but our steps are now ready to be treated again
Not so straight forward
Try your self - 1 year ago
It takes a lot of effort to scrub all the peeling paint. Not worth it. I got fed up half way through and did not apply it all over the decking, and with enough coats of decking stain you cannot tell the difference on the area that it had been used on. My advise is to stain without stripping the old paint.
Customers who bought this also browsed
Diall Clear Decking oil 5L
Revitalise and nourish your decking with this decking oil from Diall Simply apply using a brush and leave for 8 hours to dry. Covers up to 9 m² per litre on average. Replaces the natural oils lost through weathering Protects , nourishes, waterproofs & enhances the natural colour of wooden ...
Ronseal Clear Decking end grain protector 0.75L
You can apply this decking end grain protector from Ronseal to , using a brush, to provide protection. It takes 24 hours to dry and will cover up to 8 m² per litre on average. Keeps decks strong & protected from water damage
Ronseal Country oak Matt Decking stain 5L
You can apply this decking stain from Ronseal to , using a brush, to colour and provide protection. It takes 90 minutes to dry and will cover up to 6.4 m² per litre on average. Protects against weathering & wear & tear Prevents wood from greying, & colour from fading ...
Ronseal Decking cleaner & reviver 5L
You can apply this decking cleaner & reviver from Ronseal to , using a brush, to provide protection. It takes 24 hours to dry and will cover up to 5m² per litre on average. Prepares new wood, revives weathered wood & keeps your deck clean Removes unsightly dirt, grease, fungus, ...