See more Floor Paint & Treatments
Ronseal Diamond hard Clear Satin Floor varnish 2.5L
This clear floor varnish from the Ronseal Diamond range can be applied to interior using a brush. The low odour varnish dries in just 30 minutes and will cover up to 18 m² per litre on average.
- Give bare floors a good sand then wipe down with white spirit. For previously painted floors remove all previous coatings & sand down
Features and Benefits
Spend less time varnishing your floors and more time enjoying it with this Perfect Finish Diamond Hard floor varnish. It comes with the Perfect Finish applicator which has a long handle, taking the backache out of varnishing your floor. The Perfect Finish pad applies the optimum amount of varnish, so you don't get any brush marks, and is 5 times faster than using a brush. It's also the toughest varnish Ronseal do, so it'll last, keeping your wooden floors protected and looking great for longer.
- Non-yellowing so you won't need to reapply as often
- Quick drying in just 30 minutes
- Ensures your wooden floors are protected and stay looking great
- Low odour so it's more pleasant to use
- Includes Perfect Finish applicator, 5x faster than using a brush
Health and Safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Coverage||Up to 18 m² per litre|
|Durability||Diamond hard protection|
|Drying time||30 minutes|
|Recoat time||2 hours|
|Protection||Diamond Hard protection against knocks scratches & spills|
|Touch dry time||30 minutes|
Lizbess - 1 year ago
We are pleased with the result. Our daughter who has never done this before completed the job without problem
Beebs74 - 1 year ago
Bought and done the floor over a few days. Preparation done and floor looking flat, damage removed and filled. Started using the paint with the flimsy applicator which broke. The paint albeit thin is difficult to fully spread and you end up with thickened bits or ridges where you have placed the brush on the floor. It's vey difficult to get an even spread meaning it looks very patchy. I'm on my 5th coat and whist it's starting to look better it's not great. you see every mark from the application which look like brush marks and bubbling due to air leaves marks.
TimmyMoo459 - 1 year ago
After only 2 coats (recommended 3) my oak parquet flooring is rock hard and protected. A little goes a long way and the pad applicator makes it so easy Anschluss fast to apply. Worth paying the extra for it.
Would not recommend this product at all
Anonymous - 5 years ago
The marketing slogan that it does what it says on the tin is flawed because it states that the varnish and paint pad deliver a beautiful smooth perfect finish. The pad is supposed to reach right up to skirting board - no need for a brush. Actually, the paint pad delivered a streaky and uneven surface that was no better even after two coats. I was very careful to follow the instructions and am extremely disappointed at the end result.
I have now had to spend two days stripping the varnish off the floor and will now apply another product.
Great varnish, poor applicator
Cheshiregirl - 6 years ago
Applicator brush wouldn't fit together so the job was a lot more difficult than expected. Varnish very good.
Customers who bought this also browsed
Colours Clear Satin Floor varnish 2.5L
This clear floor varnish from Colours can be applied to interior using a brush. The low odour, non yellowing varnish takes 1 hours to dry and will cover 20 m² per litre on average.
Ronseal Diamond hard French oak Satin Interior varnish
This french oak interior varnish from the Ronseal Interior diamond hard range can be applied to interior using a brush. The varnish dries in just 20 minutes and will cover up to 24 m² per litre on average. Easy to use Dries in just 20 minutes Diamond Hard durability and ...
Ronseal Diamond hard Light oak Satin Interior varnish
This light oak interior varnish from the Ronseal Interior diamond hard range can be applied to interior using a brush. The varnish dries in just 20 minutes and will cover up to 24 m² per litre on average. Easy to use Dries in just 20 minutes Diamond Hard durability and ...
Ronseal Diamond hard Pearwood Satin Interior varnish 0.75L
This pearwood interior varnish from the Ronseal Interior diamond hard range can be applied to interior using a brush. The varnish dries in just 20 minutes and will cover up to 24 m² per litre on average. Easy to use Dries in just 20 minutes Diamond Hard durability and protection ...