See more Wood Furniture Paint & Treatments
Ronseal Diamond hard Clear Satin Interior varnish 0.25L
Our stores do not stock this product
This clear interior varnish from the Ronseal Interior diamond hard range can be applied to interior using a brush. The varnish dries in just 20 minutes and will cover up to 24 m² per litre on average.
- Make sure all surfaces are free from wax, grease & oil
Features and benefits
This Ronseal interior varnish provides a beautiful, natural finish for doors, skirting, tables, furniture and other wood inside your home. Diamond Hard protection provides superior resistance against scratches, knocks and scuffs. It is touch dry in 20 minutes and ready to re-coat in 1 hour.
- Easy to use
- Dries in just 20 minutes
- Diamond Hard durability and protection
- Control air pollutants by choosing products with lower solvent levels.
- Easy to use
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Coverage||Up to 24 m² per litre|
|Durability||Diamond hard protection|
|Drying time||20 minutes|
|Recoat time||1 hour|
|Protection||Resistance against scratches, knocks & scuffs|
frenchly - 2 months ago
Its been on a table for 4 weeks and has become tacky and is coming off in places.
PeteW4 - 4 months ago
Whilst I do understand the negative comments made by others I have a different opinion. I have used this varnish for a number of projects. Including some old Ercol tables. If applied very thinly, thus avoiding the white blobs, and very quickly it does produce a good, hard finish. It is not an equivalent product to spirit varnish. It is applied differently and does not improve the patina of the wood but it is good for some projects.
Appalling don’t buy this
Twickenham Phil - 5 months ago
Supposed to be satin. More like high gloss. Now I have to resend the door and revarnish. Utter waste of time.
jojo49 - 2 years ago
Varnish has nearly been on a year now amazing quality rock hard surface after 3coats looks beautiful
YAG67 - 2 years ago
I was a woodwork teacher for 35 years and have worked in wood since retiring 10 years ago making fine marquetry boxes and small hardwood furniture. I have always used spirit based varnish and shellac sanding sealer for many of my woodwork projects for its durability and the way it enhances the grain.
This product does none of these things and is simply not fit for purpose. It has left black spots in the wood on many of my oak projects and I have had to strip them back and refinish them. It dries too quickly and often leaves brush marks so cannot be worked into corners and crevices. If you do it will foam up and produce bubbles which stay on the surface. The final finish is certainly not `Diamond Hard`!
It does produce a very neutral/natural finish which to some may be a good feature but it does nothing to really enhance the grain and beauty of the wood.
Yes it is quick drying and you can wash your brushes in water with little odour.
However if the final finish is poor then I`ll be staying with spirit based varnish.
This product needs more development and is simply sold on convenience and environmental factors.