See more Floor Paint & Treatments
Ronseal Diamond hard Medium oak Satin Floor varnish 2.5L
This medium oak floor varnish from the Ronseal Diamond range can be applied to interior using a brush. The varnish dries in just 30 minutes and will cover up to 18 m² per litre on average.
Features and Benefits
Want a floor varnish that lasts? Look no further. With Diamond Hard protection, this floor varnish from Ronseal will keep your wooden floors protected and looking great for longer. It'll protect your floors from knocks, scuffs, spills and heels, so it's ready for whatever daily life throws at it.
- Non-yellowing so you won't need to reapply as often
- Quick drying in just 30 minutes
- Ensures your wooden floors are protected and stay looking great
- Low odour so it's more pleasant to use
Health and Safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Colour description||Medium oak|
|Coverage||Up to 18 m² per litre|
|Durability||Diamond hard protection|
|Drying time||30 minutes|
|Recoat time||2 hours|
|Protection||Diamond Hard protection against knocks scratches & spills|
|Touch dry time||30 minutes|
Not at all the colour on the tin
HouseOwner - 9 months ago
We got this varnish for our floors, thinking it would be a nice looking 'medium oak' colour. but it turned out way more red toned than we could have ever anticipated and looks NOTHING like the front colour. Super disappointed.
Love this product
Suzeeeeee - 1 year ago
This is a great product. It dries quickly to a tough finish. You wash the brush in water. And it gives a good colour which evens out any imperfections. It's a bit pricey but it covers a lot and it's well worth the expense.
Great product, deceptive colour descriptions.
Painter2000 - 3 years ago
After spending weeks prepping the floor, researching products and colours, I chose this Ronseal medium oak. The application and finish are great but the colour bears so little resemblance to that illustrated I could cry. Far from a mellow warm shade I am faced with a very dark chestnut colour more reminiscent of a 'hides everything' pub floor. What to do with the remaining litre and a half, what to paint the staircase with that won't clash hideously and how to get more sun in to start the (hopefully!) fading process? Hugely disappointed.
Doesn't do what it says on the tin
Romac - 3 years ago
Goes on reasonably well, as a previous review says ensure you take time on the first coat. I put 5 coats onto a sanded pine floor and it does have a rich colour but after approximately 5 months I will now have to re-paint the hallways and living room as its started to wear through to the bare wood.
If your floors are anything other than perfectly level with no lumps, bumps or slightly raised edges on floorboards etc then it will begin to wear unevenly. For a product that calls itself 'Diamond Hard' and is formulated specifically for floors it doesn't live up to its name.
Bloke252 - 4 years ago
Easy to use and gives a lovely Satin finish. Used on sanded pine floor boards this product gave a rich toned beautiful deep texture and brought out the wood grain well. Advice - take care with your first coat to getting it even and avoid leaving brush stokes, subsequent coats will not improve the first application. Easy to use, I re-coated and therefore was walking/sitting on the first coat after only two hours.
Customers who bought this also browsed
Colours Clear Satin Floor varnish 2.5L
This clear floor varnish from Colours can be applied to interior using a brush. The low odour, non yellowing varnish takes 1 hours to dry and will cover 20 m² per litre on average.
Ronseal Diamond hard Antique pine Satin Floor varnish
This antique pine floor varnish from the Ronseal Diamond range can be applied to interior using a brush. The varnish dries in just 30 minutes and will cover up to 18 m² per litre on average. Non-yellowing so you won't need to reapply as often Quick drying in just 30 ...
Ronseal Diamond hard Dark oak Satin Interior varnish
This dark oak interior varnish from the Ronseal Interior diamond hard range can be applied to interior using a brush. The varnish dries in just 20 minutes and will cover up to 24 m² per litre on average. Easy to use Dries in just 20 minutes Diamond Hard durability and ...
Ronseal Diamond hard French oak Satin Interior varnish
This french oak interior varnish from the Ronseal Interior diamond hard range can be applied to interior using a brush. The varnish dries in just 20 minutes and will cover up to 24 m² per litre on average. Easy to use Dries in just 20 minutes Diamond Hard durability and ...