See more Floor Paint
Ronseal Diamond Slate Satin Floor paint2.5L
A washable, slate floor paint in a satin finish. Covers up to 12 m² per litre and dries in 72 hours.
- Protects against knocks, scuffs, scrapes & spills
- Resists flaking, peeling & chipping
- Suitable for bare or previously painted floors
- Recommended for multi surface
Features and Benefits
This Diamond Hard floor paint will transform your chosen floor and leave an extra durable finish. It'll stand up to knocks, scrapes, spills and scuffs, so it's ready for whatever life decides to put it through.
- Diamond Hard protection for a durable finish
Health and Safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Coverage||Up to 12 m² per litre|
|Number of coats||3|
|Drying time||72 hours|
|Recoat time||4-6 hours|
|Touch dry time||4-6 hours|
|Application||Brush, roller or pad|
|Cleaning instructions||Clean equipment in warm water|
|Surface preparation||Wire brush concrete & stone floors, if bare seal with a stabilising solution, if painted wipe with white spirt. Sand bare wooden floors|
Shiv2056 - 10 months ago
I bought one can of paint to start with and ended up needing 2. Both had same barcode and everything 2 different colours :( had to paint over what I'd already done to get them to match
Does exactly what it says on the tin.
Wolfie444 - 11 months ago
Dries quickly which is a bonus when painting the stairs. Covers the floor nicely and colour was as expected from the picture on the tin.
Same Paint different colour
Anonymous - 1 year ago
I had to get an extra tin but although the description was exactly the same as the first tin the colour was different so I had to repaint a large area.
Good enough for your average garage!
Sir D - 1 year ago
I painted over some old paint in my garage and have to say it has covered very well and looks great. It took two coats to get a decent covering so I have concerns it would have taken a lot more if it had been new concrete.
I also feel that it won't take much to chip the paint as it is a thin covering so if you need something more substantial got for an industrial standard epoxy mix version.
Janeolly - 1 year ago
Excellent result. I changed my mind so many times as to what to do with our bathroom floor. I wanted tiles/vinyl but couldn't really afford it. I eventually jumped straight in and brought this paint. I'm so glad I did. I added so valspar glitter to the mix for some added bling. Dries really quickly which is great if you have children. I've done 3 coats and all dried within 6 hours. No nasty smells either. 100% recommend this product so far! £150 quoted for floor reduced to a £15 can of paint. (1litre) Happy days!