See more Shed & Fence Paint & Treatments
Ronseal Fence life plus Red cedar Matt Fence & shed Wood treatment, 5L
Our stores do not stock this product
You can apply this opaque shed and fence treatment from the Ronseal Fence life range to all rough sawn and smooth planed sheds and fences, using a brush, to colour and provide protection. It takes 1 hour to dry and will cover up to 6 m² per litre on average.
- Colours & protects rough sawn & smooth planed sheds and fences
- Suitable for Wood
- Manufacturer's Guarantee: 5 years
Features and benefits
Ronseal fence life plus+ can be used on all rough sawn and smooth planed sheds and fences. It'll stand up to rain, frost and snow and won't lose its colour in the sun. With 2 coats on rough sawn or 3 coats on smooth planed wood the colour will last for up to 5 years. Even better, you have the choice to brush it or spray it on and it can be applied to damp wood.
- 5 years lasting colour
- Protects in all weather
- Rainproof in 1 hour
- For all sheds and fences
- Can be applied using a brush or sprayer and to damp wood
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Range||Fence life plus|
|Recoat time||4 hours|
|Number of coats||2|
|Resistant to water||Waterproof|
|Suitable use type||Fence & shed|
Very good but pitty
feduptaff - 1 month ago
Very good have bought nearly 200 worth but for love of money i can not get another one in Swansea or llanelli stores to finish the job.
Emailed head office and not any help there
Leekinsella - 1 month ago
Poor quality product. Would not buy again, done a very poor job
It was ok
Snake 5 - 2 months ago
It looks good, and spreads well, it's a beautiful colour
Brilliant Paint if its true
Tidy Taff - 2 years ago
I have just purchased this fence life plus + and having read through the how to apply etc...There is no mention about stirring well before use....Does that mean it can be applied straight from the tin without stirring it ?