Ronseal One Coat Everywhere Pure Brilliant White Matt Multi-surface Emulsion paint, 2.5L

Product information

Ronseal One Coat Everywhere paint makes decorating your whole home easier and quicker. It'll give rich colour and tough protection to walls, ceilings and pretty much anything else you want to paint. It's stain resistant and washable, ready to stand up to the challenges of every day life.

• Guarantee - Statutory
• Suitable for use on Multi-surfaces
• Surface Preparation - For previously painted walls: Sand off any loose or flaking paint. Then give the walls a wipe with a damp cloth. If painting over a very bold or contrasting colour, use a basecoat first. Or you may need to put on an extra coat. For bare plaster: If you've had your walls and ceilings re-plastered, let it dry for 7 days before painting. You'll then need to seal the plaster. Use a basecoat or a plaster sealer for this. For bare & previously painted wood: Give the wood a light sand with 120 grit sandpaper, then wipe away the dust with a damp cloth. Fill any holes and cracks and treat any knots. For bare and painted metal: Sand of any loose and flaking paint, then wipe away the dust with a damp cloth. *If you're painting ferrous metals, like steel or cast iron, you'll need to use a specialist metal primer first.
• Instructions for Use - Give your paint a good stir. If you've got more than one tine of the same colour, mix them together. This'll ensure the colour is consistent. Get lots of paint on your roller or brush. Always work from dry to wet areas. Don't spread the paint too thin. Extra coats may be needed when trying to cover bold or contrasting colours. It'll be touch dry in 1 hour. If the second coat is needed wait 2-4 hours. Do not thin this paint.
• Instructions for Storage - Protect from frost

Features and benefits

• One paint for every room
• Grease, stain & mould resistant
• Quick drying
• Only one coat needed
• Tough and washable
• Can be used on previously painted walls, bare plaster, wood and metal