See more Pest Control Treatments
Ronseal Total Clear Matt Wood preserver, 5L
Our stores do not stock this product
You can apply this wood preserver from the Ronseal Total range to , using a brush, to provide protection. It takes 24 hours to dry and will cover up to 8 m² per litre on average.
- Suitable for Wood
- The wood needs to be clean & bare, this’ll help the oil soak in. You’ll need to sand off any paint or stain.
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Recoat time||24 hours|
|Number of coats||3|
|VOC level||Very high|
|Instructions for care||Wash brushes out in white spirit or brush cleaner.|
Jazmer - 2 years ago
I purchased this to use on cladding for our shed. Very easy to apply and dries completely clear. Further protection against rain is required as this product is not water proof
Stop the rot
baz Rochdale - 2 years ago
I will not be able to review the effectiveness of this product for several years.
Whilst it was simple to use I found it rather expensive.
Marijay - 2 years ago
I bought this product to preserve clean wood that I had made into a summer house. The wood was preserved first then it was painted using Cuprinol wood stain. Great finish.
Jmorl - 2 years ago
It was a good price and does what it says on the tin
Ralphyboy - 2 years ago
No doubt a very good product, although rather expensive. Would have thought B&Q would have had a similar product at a far more reasonable price, as they do with so many other lines.