See more Primers & Undercoats
Ronseal White Satin Primer & paint 0.75L
This White satin primer & paint has been specially designed to give a durable and long-lasting finish on a range of surfaces. Simply apply 2 coats with a brush and leave for 4 hours to dry - a great way to give the surfaces additional protection. Covers 6.5 m² per litre on average.
- Guarantee - 10 years
- Non drip
Features and benefits
This Stays White 2in1 Primer & Paint is the easiest way to paint bare or worn interior wood. No need to buy a separate primer before painting, simply apply 2 coats and this paint primes and paints with just one tin. It's guaranteed to stay white and won't yellow over time. It's also water based so there's no strong odour and brushes can be easily washed out with soapy water.
- No need to use a primer, saving you time and effort
- Use on bare or previously painted wood
- Non drip, so it's really easy to use
- Guaranteed to stay white for 10 years
- Low VOC - Control air pollutants by choosing products with lower solvent levels
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Litre capacity (L)||0.75L|
|Drying time||4 hours|
|Recoat time||4 hours|
|Number of coats||2|
|Coverage||6.5 m² per litre|
|Paint/Stain/Varnish base||Water based|
|Durability||Tough & durable|
|Non Yellowing||Non yellowing|
|Fade resistant||Stays white for 10 years|
|Paint type||Primer & paint|
Does exactly what it says on the tin.
Mickeymo63 - 3 years ago
Stays white. Don't you just t when you move an object from your window sill, & you are left with a yellowish "shadow" where it used to be?
Pluses: smells different to standard gloss/satin paint, but dissipates quicker and not so overpowering. Dries quicker too.
Minuses: even on pre-primed doors/skirting etc. for best results, minimum 3 coats required.
sheila62 - 3 years ago
After seeing this paint I thought let's give it a try.
even the skirting and door frames looked awful
after 3 coats I thought what a waste of money
done kitchen door left it with roller marks ..another coat even worse
should really have taken it back but I thought they would say I had not prepared area or sanded wood. I did every thing as I should so it was the quality of the paint
After reading reviews... well an expensive misake
I would not even give it 1 star
Back to buy dulux more money more time ..... why did I not read the review first
Anonymous - 3 years ago
1st tin was good then got another and coverage was poor. Like it was watered down. Complained to ronseal and they sent me a tin. Think since the 1st tin they have changed the formula. I still use as everywhere is done now since and just use to cover up marks etc.
Can't understand why poor reviews!!
Jo2102 - 3 years ago
Bought this paint after having a terrible time with the dulux satin wood and crown version drying tacky, peeling off and getting extra grubby on my banisters. After a light sanding and two coats of this paint, it applied and dried beautifully.
Val1956 - 3 years ago
Bought this to paint a dolls cot. Cot was sanded down before painting and as this paint was supposed to be a primer as well thought it would be good. After 4 coats it still didn't cover, ended up having to use spray paint.